Additionally, paste this code immediately after the opening  tag:
Quick Used Equipment Filter

used search tag
Total: $0.00
    Nothing In Your Cart...
Go to Cart


  • Cover more acres between fills with 2,000-gallon (7570L) solution tank
  • Faster fills at up to 300-gallons (1136L)/minute
  • Versatility to apply pre-plant, high-volume N or low-rate pesticide
  • Wide flow-rate range from 5-420 gallons (18.9L- 1589L)/minute
  • Apply at 80 gallons (302.8L)/ acre at up to 25 mph (40.2 km/h)

View Product Brochure


LS475 applying in the fieldLS475 applying in the field

During the busy spring season, you need to complete jobs as crops are planted, from applying high-rate fertilizer on unplanted corn fields to low-rate pre-emergent herbicide on soybeans. Dual centrifugal solution pumps with dedicated magnetic flow meters work together to achieve pin-point rate accuracy through the entire flow range between 18.9 and 1589.9 L/min (5 and 420 gpm).


Dual pumps enable you to apply:

  • High rates at higher speeds without sacrificing tank agitation. For example, this system can apply 378.5 L (100 gal.) per acre at speeds over 32.2 km/h (20 mph). Applying at faster speeds means more acres covered per hour, and duals pumps give operators the ability to apply more product per acre.

    NOTE: Application rates can be impacted by solution density, nozzle size, and tip pressure.

  • A wide range of rates with the same machine, increasing machine capability and improving asset utilization. For example, apply 32 percent fertilizer at a rate of 302.8 L (80 gal.) per acre, then move to the next field and spray glyphosate with 37.85 L (10 gal.) of carrier per acre – all by simply capping the cam-lock tips and rotating high-flow nozzle bodies.

Solution pumps are common components with self-propelled sprayers and use flange-face fittings instead of pipe threading for easy maintenance.


Magnetic flow meters:

  • Have no wear parts, reducing downtime
  • Are accurate through a wider range than turbine flow meters
  • Are compatible with suspended fertilizer solutions
LS475 solution and rinse tanksLS475 solution and rinse tanks

With higher-speed planting, the season is becoming more condensed every year. When you need to get acres covered, getting tender trucks back to the plant increases productivity. To hold more product onboard, the LS475 solution system features a stainless steel 7570.8-L (2000-gal.) solution tank and black poly 757.1-L (200-gal.) rinse tank.


The large solution tank allows operators to cover more acres between refills. This tank gets tender trucks empty faster and back on the road, translating into less idle time for the tender truck and you and quicker load turn-arounds.


The industry’s largest rinse tank provides more onboard fresh water for:

  • Triple rinsing the solution tank with the automated rinse cycle
  • Flushing the boom plumbing
  • Container and eductor bowl rinsing
  • Optional on-board hydraulically powered pressure washer

The light-blocking black poly material discourages algae growth in the rinse tank.

LS745 boomLS745 boom

You want the least amount of machine traffic in their fields, and the wide LS475 boom allows ag service providers to cover more acres per pass, reducing the amount of total passes.


The time-proven 27.4-m (90-ft) 4 Series Sprayer steel boom unlocks reliable productivity for ag service providers. This durable boom features:

  • Full-boom breakaway
  • Tri-direction boom-tip breakaway
  • Auto-fold

The standard dual plumbing system features 76.2-cm (30-in.) off-center high-flow nozzle bodies (turrets) and a 152.4-icm (60-in.) on-center cam-lock. When configured for 152.4-cm (60-in.) cam-lock spacing, the effective spray pattern is 29 m (95 ft). The 76.2-cm (30-in.) nozzle body configuration achieves a 27.4-m (90-ft) spray pattern.


With 152.4-cm (60-in.) high-flow cam-lock plumbing, you cover 12 percent more acres per pass compared to the largest competitor boom width at 25.9 m (85 ft). Make fewer passes through the field and reduce compaction, as well as time spent spraying, with this boom.


You can easily switch from low-pressure/high-rate fertilizer application to high-pressure/low-rate for pre-emergent herbicide, burn-down, or pasture application. This dual plumbing eliminates the need for you to route additional plumbing lines and connections.


Seven-section boom control:

  • Reduces overlaps
  • Minimizes wasted product
  • Improves quality of application

Utilize John Deere Section Control software for an automated application experience.


Auto-fold allows the boom to automatically unfold and fold faster, getting operators in and out of the field quicker, and the low-profile, flat-fold design delivers superior transport visibility.

LS475 load system keypadLS475 load system keypad

When the tank is empty, every second counts trying to get back into the field. PowrSpray features independent fill and spray circuits with dedicated pumps to maximize flow. The dedicated self-priming transfer pump can fill the solution tank at over 1135.6 L/min (300 gpm). This PowrSpray system can:

  • Automatically fill to a predefined tank level while automatically adjusting engine speed
  • Pull fresh water from the rinse tank to clean the fill system
  • Be manually reduced if a slower fill rate is desired
  • Pause filling, giving you sufficient time to add ingredients and rinse containers
  • Allow for quick and easy operation at the load station for all skill levels

The 12-button keypad enables complete automation, reducing the need for you to turn multiple ball valves. The features include:

  • Fill station light on/off (button 1)
  • Rinse water source for transfer pump (button 2)
  • Menu/numeric input (button 3)
  • Agitation (button 4)
  • Pressure washer (button 5)
  • Automated rinse cycle (button 6)
  • Eductor/container rinsing with solution pump (button 7)
  • Eductor/container rinsing with transfer pump (button 8)
  • Eductor on/off (button 9)
  • Push-on target fill (button 10)
  • Push-on manual fill (button 11)
  • Pull-on target fill (button 12)
  • Pump speed increase/decrease (via manual hydraulic valve)
LS475 load station with keypadLS475 load station with keypad


Key Specs ls475-liquid-system
Current Model
EnginePeak rated power
272 kW
365 hp
Solution system - Capacity7570 L
2000 gal.
Rinse tank capacity757 L
200 gal.
Boom length options/Material27.4 m
90 ft
Spray speed range48 km/h
30 mph
Transport speed, maximum75 km/h
46.6 mph
SuspensionFour-wheel leaf spring and front axle dampers
Crop clearance with standard tires
Total weight with widest boom
Peak rated power272 kW
365 hp
Power bulge298 kW
400 hp
EmissionsFinal Tier 4 (FT4)
Number of cylindersSix
Displacement9 L
549 cu in.
TransmissionInfinitely Variable Transmission (IVT™)
Fuel tank capacity586.7 L
155 gal.
Diesel exhaust fluid (DEF) tank capacity29.5 L
7.8 gal.
AutoTrac speed, maximum40 km/h
25 mph
Solution system
Capacity7570 L
2000 gal.
Tank materialStainless steel
Rinse tank capacity757 L
200 gal.
Solution pump flow18.9 to 1589.9 L/min
5 to 420 gpm
Quick fill size7.6 cm
3 in.
Rate control make
Automatic section controlJohn Deere Section Control (optional)
Solution system controlPowrSpray™ (automatic)
Fill locationSide fill
Fill pump flowUp to 1135.6 L/min
300 gpm
Chemical injection method
Chemical eductorStainless steel
Chemical eductor capacity (size)32 L
8.5 gal.
Flow meter sizeDual 5.1 cm
2 in.
Suction strainer
Pressure strainer
Boom strainer
Boom length options27.4 m
90 ft
Automatic boom heightStandard
Plumbing materialStainless steel
Boom MaterialSteel
Ground height adjustment
Breakaway width3.3 m
10.8 ft
Boom sectionsSeven sections
ExactApply™ Nozzle SpacingsFive-position high-flow nozzle body: 76.2 cm
30 in.
Cam-lock: 152.4 cm
60 in.
DriveFull-time two-wheel drive (2WD)
Hydraulic reservoir capacity
Spray speed range48 km/h
30 mph
Transport speed, maximum75 km/h
46.6 mph
TypeDual c-channel frame
Dry compatibleYes
SuspensionFour-wheel leaf spring and front axle dampers
Crop clearance with standard tires
Front tires
Rear tires1050/50R32 tires
Flotation tires
Hydraulic tread adjust
Wheel tread spacing
Wheel base430 cm
169.3 in.
Turning radius10.5 m
34.5 ft
Parking brakeIVT and two-wheel (rear) pneumatic parking brake
Primary brakesIVT and four-wheel pneumatic brakes
Ladder raise/lowerAutomatic
Total weight with 80-ft boom
Total weight with 90-ft boom
Total weight with 100-ft boom
Total weight with 120-ft boom
Total weight with carbon fiber boom
Pressure washerOptional integrated system
Air compressor
Foam marker capacity
Remote service tools

Need Help?

call icon

Call us


locations icon