×
Quick Used Equipment Filter












used search tag
Total: $0.00
Go to Cart

John Deere 2430

Chisel Plow


  • Hydraulically-adjusted knife-edge rolling basket with internal scraper
  • Adjust shank depth and rolling basket down-pressure on-the-go with exclusive TruSet™ technology
  • Radial tires improve flotation and transport
  • New rear hitch adjusts side-to-side for easier hookups


Features


TruSet™ Tillage technology
TruSet Tillage technology on the 2430 Chisel Plow TruSet Tillage technology on the 2430 Chisel Plow

The 2430 Chisel Plow is designed for precise, accurate depth control. Precise depth control is very important for conservation of moisture, fertilizer placement, and soil management. Soil layers of differing soil type vary across farms and even across fields. The ability to adjust for these conditions is extremely important to producers today.

 

TruSet and single-point depth control both come as standard equipment. Both provide accurate depth control to best utilize available tractor horsepower.

 

With TruSet, these adjustments can be done on the move, increasing productivity and making the day go easier for operators. TruSet provides accurate and precise depth control using individual wheel sensors and electronic circuitry to perform tasks of leveling and depth measurements unprecedented in the industry until now. Accurate depth is displayed to the nearest 2.5 mm (1/10 in.).

 

The floating hitch, frame strength of the Tube-Thru-Tube manufacturing, and the wheel package placement allow the 2430 to offer unmatched consistency of depth (front-to-back and side-to-side). Fuel can be saved, soil can be mixed and shattered, and accurate depth can be maintained. This represents true soil management for the producer.

TruSet Side-to-Side

TruSet Side-to-Side gives producers the same level of individual section control that was available with AccuDepth™ hydraulics. However, there are differences in how the two systems are hydraulically plumbed.

 

The AccuDepth hydraulics required a correction valve on every frame section since the hydraulics were plumbed in parallel. The TruSet system is plumbed into a single-point (series) system.

 

The series hydraulics give producers the option of controlling depth with just the single-point depth control valve or individually controlling each frame section with a correction valve mounted at the base of each depth control cylinder on the wings. The individual section control with TruSet Side-to-Side is an upgrade to the base TruSet Tillage system.

 

TruSet Side-to-Side is controlled by five sensors compared to one sensor with the base TruSet Tillage system. With the five-sensor control, the implement can make depth control adjustments via sensor feedback on the wings.

 

TruSet Side-to-Side eliminates the need to rephase the depth control cylinders after several rounds in the field. However, it does require another step when calibrating.

Documentation and prescription

With integrated TruSet Tillage technology, operators can incorporate documentation and prescription functionality into their tillage operations. The tillage documentation feature will give producers the ability to capture and analyze the pass for additional coverage of the crop production cycle. Prescription functionality provides producers the capability to ensure their tillage operations are executed correctly, optimizing their investment in preparing for the next crop.

 

Operators can document data for the depth of their sweeps along with rolling basket down pressure. By creating an as-applied map based off of global positioning system (GPS) data for the job performed by each functional area on the implement, TruSet enables producers to document their tillage passes then later review and analyze the data for future agronomic decisions.

 

Additionally, the Prescription Creator by Agrian® company, a connected partner tool through the John Deere Operations Center, enables producers to create prescriptions for each functional area. Data from previous yields, soil surveys, or freehand drawing tools can be used to create prescriptions that will command the implement to the desired depth and pressure settings for optimum agronomic results.

Functionality by control option
  Single-point TruSet TruSet Side-to-Side
One adjustment to change implement depth X X X
Mechanical adjustment option X X X
In-cab adjustment option --- X X
In-cab individual section leveling --- --- X
Tillage documentation and prescription --- X X

 

Agrian is a trademark of Agrian, Inc.

Radial tires
Radial tires on the chisel plow Radial tires on the chisel plow

Radial tires reduce compaction points while operating in the field and minimize downtime caused by tire failures both in the field and during transportation. Radial mainframe tires now come in base equipment and can be an option on the wings. With a wider tire plate and lower inflation pressure, radial tires have a larger contact area with the ground to help minimize compaction.

Finishing components

The 2430 offers different rear attachment options to meet the unique agronomic needs of each producer. Producers have a choice of two rear attachments on the 2430 Chisel Plow.

#
Knife-edge hydraulic rolling basket with internal basket scraper
Knife-edge rolling basket for the 2430 Chisel Plow Knife-edge rolling basket for the 2430 Chisel Plow
Internal basket scraper Internal basket scraper
Close-up of internal basket scraper Close-up of internal basket scraper

The knife-edge rolling basket for the 2430 Chisel Plow is made of hardened steel and handles rock strikes and adverse conditions well. The ease of down pressure adjustability allows the tool to adapt to changing field conditions. The internal basket scraper allows for a uniform field finish in wet conditions because baskets do not need to be raised out of the ground to avoid plugging; they can remain in the ground 100 percent of the time.

 

The John Deere 2430 Chisel Plow offers an active hydraulic rolling basket that gives the operator wide-ranging adjustability for a variety of conditions. The drawbars and rolling basket on the rear harrow are built with strength in mind for the demanding fall conditions. The system was designed to have the ability to run the rolling baskets in three different positions to finish and level the soil:

  • Raised: allows the operator to raise the rolling baskets in harsh, muddy conditions
  • Float: allows the operator to float the rolling baskets to lightly fluff soil
  • Apply down pressure: allows the operator to adjust the basket pressure to provide consistent contact with the ground, provides a firm seedbed, and shatters root balls

The hydraulic rolling basket is offered with the knife-edge basket, which is the best for heavier, wet soil.

240 Coil-Tine Chisel Plow Harrow
240 Coil-Tine Chisel Plow Harrow 240 Coil-Tine Chisel Plow Harrow

The 240 Coil-Tine Chisel Plow Harrow is designed specifically for the 2430 Chisel Plows. Harrow performance has grown increasingly important over the last few years as soil profile finish and residue-handling capability are on the top of the list for producers. Both attributes are standouts on this heavy harrow.

Variety of models and sizes available
2430 Chisel Plow 2430 Chisel Plow
2430 Chisel Plow 2430 Chisel Plow

The 2430 Chisel Plow is available in rigid and rigid fold, three-section folding, and five-section folding frame models.

 

Models

Type of fold

Standards

Rigid

Non-fold or horizontal fold

TruPosition™ or
Tru-Depth

Flexible

Three-section
over-center fold

TruPosition or
Tru-Depth

Flexible

Five-section
over-center fold

TruPosition

 

Rigid configurations

Working widths Centerframe size Transport width
3.35 m to 4.47 m (11 ft to 14 ft, 8 in.) 3.66 m (12 ft) non-folding 3.35 m to 4.9 m (11 ft to 16 ft)
4.3 m to 5.4 m (14 ft to 17 ft, 8 in.) 4.6 m (15 ft) non-folding
5.3 m to 6.4 m (17.5 ft to 21 ft) 3.66 m (12 ft) folding

 

Three-section configurations
Working widths Centerframe size Transport width
6.4 m to 7.5 m (21 ft to 24 ft, 7 in.) 3.05 m (10 ft) 4.8 m (15.75 ft)
7.6 m to 8.7 m (25 ft to 28 ft, 8 in.)
7.04 m to 7.8 m (23 ft, 1 in. to 25.75 ft) 3.66 m (12 ft) 5.5 m (17.92 ft)
8.2 m to 9.3 m (27 ft to 30 ft, 8 in.)
9.2 m to 10.3 m (30 ft, 4 in. to 33 ft, 8 in.)
10.7 m to 11.35 m (35 ft to 37.25 ft)
9.14 m to 9.9 m (30 ft to 32 ft, 5 in.) 4.6 m (15 ft)  6.375 m (20.92 ft)
10.4 m to 11.6 m (34 ft, 2 in. to 38 ft, 2 in.)
12.2 m to 12.9 m (40 ft to 42.25 ft)

 

Five-section configurations
Working widths Centerframe size Transport width
13.4 m to 14.2 m (44 ft to 46 ft, 8 in.) 3.66 m (12 ft) 5.3 m (17.33 ft)
14.2 m to 15.2 m (46.75 ft to 50 ft)
15.85 m to 16.7 m (52 ft to 54 ft, 8 in.)
14.3 m to 15.2 m (46 ft, 11 in. to 49 ft, 10 in.) 4.6 m (15 ft) 6.1 m (20 ft)
16.8 m to 17.6 m (55 ft to 57 ft, 10 in.)
18.3 m to 19.2 m (60 ft, 2 in. to 63 ft)


 NOTE: Tru-Depth standards are available through 10 m (33 ft) only.

Excellent residue-handling capability
2430 Chisel Plow 2430 Chisel Plow

The 2430 Chisel Plow has excellent residue-handling capability in primary tillage at all residue levels.

Typical percentages of residue cover remaining from the 2430 are listed in the following table. The percentages do not consider variables such as the condition of the residue, speed, and soil type.

 

For machines with 305-mm (12-in.) spacing:

 

Starting
residue
cover
(percent)

Remaining non-fragile*
residue cover
(percent)
 

Remaining fragile**
residue cover
(percent)
 

406-mm (16-in.) sweeps

51-mm x 356-mm (2-in. x 14-in.) chisel point

102-mm x 368-mm (4-in. x 14.5-in.) shovel

406-mm (16-in.) sweeps

51-mm x 356-mm (2-in. x 14-in.) chisel point

51-mm x 356-mm (2-in. x 14-in.) chisel point

406-mm (16-in.) sweeps

51-mm x 356-mm (2-in. x 14-in.) chisel point

100

80

70

100

80

70

100

80

70

90

72

65

90

72

65

90

72

65

80

65

56

80

65

56

80

65

56

70

55

50

70

55

50

70

55

50

60

50

42

60

50

42

60

50

42

50

40

35

50

40

35

50

40

35

40

32

28

40

32

28

40

32

28

 

*Non-fragile residue includes crops like corn, sorghum, wheat than 1585.8 L [45 bu]).

**Fragile residue includes crops like soybeans, edible beans, peas, wheat (under 1585.8 L [45 bu]), sunflower, peanuts, and cotton.

For machines with 406-mm (16-in.) spacing:

 

Starting
residue
cover
(percent)

Remaining non-fragile*
residue cover
(percent)
 

Remaining fragile**
residue cover
(percent)
 

457-mm (18-in.) sweeps

51-mm x 356-mm (2-in. x 14-in.) chisel point

102-mm x 368-mm (4-in. x 14.5-in.) shovel

76-mm x 610-mm (3-in. x 24-in.) shovel

457-mm (18-in.) sweeps

51-mm x 356-mm (2-in. x 14-in.) chisel point

102-mm x 368-mm (4-in. x 14.5-in.) shovel

76-mm x 610-mm (3-in. x 24-in.) shovel

100

83

73

63

63

55

50

45

45

90

75

68

58

58

50

45

40

40

80

68

59

53

53

45

40

35

35

70

58

53

45

45

38

35

30

30

60

53

45

38

38

33

30

27

27

50

43

38

33

33

27

25

22

22

40

35

31

28

28

22

20

18

18

 

*Non-fragile residue includes crops like corn, sorghum, and wheat (more than 45 bu).

**Fragile residue includes crops like soybeans, edible beans, peas, wheat (under 45 bu), sunflower, peanuts, and cotton.

Proven frame construction
3.4-m (11.17-ft) four-bar frame 3.4-m (11.17-ft) four-bar frame

Operators are requiring faster field working speeds, larger implements, and tractors because of a dramatic increase in farm size. The market is asking for and receiving tractors with more torque, more weight, and more horsepower. 

 

Accommodating 600 engine horsepower tractors requires more from implement frame and hitch components, including thicker frame tubes, additional diagonal bracing, and frame gussets. 

 

The frame is constructed of continuous 102-mm x 102-mm (4-in. x 4-in.) cross members inserted through 51-mm x 152-mm (2-in. x 6-in.), 76-mm x 152-mm (3-in. x 6-in.), and 102-mm x 152-mm (4-in. x 6-in.) fore-aft members. The mainframe boasts a structure made up of 102-mm x 152-mm (4-in. x 6-in.) fore-aft tubes.

 

The large frame member sizes, joint welds, and wheel module placement adds to the structural integrity, providing a stable front-to-rear and side-to-side operation.

Frame construction offers:
  • Consistent operating depth
  • Level operation
  • Restricts frame dip
Walk-Over wheels help provide consistent working depth
Walk-Over wheels Walk-Over wheels

Walk-Over wheels provide a consistent working depth in uneven ground for level seedbeds and complete weed control.

 

The staggered wheel design provides extra room for residue flow, obstacles, and transport stability.

Wide variety of ground-engaging tools available
Shovels, chisels, and sweeps Shovels, chisels, and sweeps
#

A wide variety of tools such as sweeps, chisels, and twisted shovels are available for the operator to maintain surface residue and ground profile under varying weather and soil conditions.

 

Click here to explore more about points, chisels, and sweeps.

Specs & Compare

ADD MODEL

Key Specs

2430
Current Model
Working widths - Rigid frameOption 1
3.56 to 5.28 m
11.67 to 17.33 ft
3.05 to 5.49 m
10 to 18 ft
Transport width -Rigid frame
Maximum depthRigid, TruPosition: max: 20.32 cm
8 in.
Spring-reset TruDepth: max: 30.5 cm
12 in.
Miles per hour8 to 11.3 km/h
5 to 7 mph
Horsepower per foot14.7 to 24.5 kW/m
6.0 to 10 hp/ft
Rigid and TruPosition standards on spacing: 30.5 cm
12 in.
11 to 18.35 kW/m
4.5 to 7.5 hp/ft
Rigid and TruPosition standards on spacing of: 40.6 cm
16 in.
14.7 to 34.3 kW/m (6.0 to 14 hp/ft) - Spring-reset and TruDepth standards on spacing of: 30.5 cm (12 in.)
11 to 26.9 kW/m (4.5 to 11 hp/ft) - Spring-reset and TruDepth standards on spacing of 40.6 cm (16 in.)
Standard spacings - Inches30.5 cm
12 in.
40.6 cm
16 in.

Fold

Working widths

Rigid frameOption 1
3.56 to 5.28 m
11.67 to 17.33 ft
Drawn rigid foldOption 1
5.3 to 6.25 m
17.5 to 20.5 ft
3-sectionOption 1
6.65 to 8.5 m
21.83 to 28 ft
Mainframe: 3.05 m
10 ft
Option 2
7.2 to 11.79 m
23.6 to 38.7 ft
Mainframe: 3.66 m
12 ft
Option 3
9.35 to 13.1 m
30.67 to 43 ft
Mainframe: 4.57 m
15 ft
5-sectionOption 1
13.4 to 16.66 m
44 to 54.67 ft
Mainframe: 3.66 m
12 ft
Option 2
14.33 to 19.2 m
47 to 63 (15 mainframe) ft
Mainframe: 4.57 m
15 ft

Transport width

Rigid frameOption 1
3.05 to 5.49 m
10 to 18 ft
Drawn rigid foldOption 1
3.35 to 4.88 m
11 to 16 ft
3-sectionOption 1
4.67 m
15.33 ft
Mainframe: 3.05 m
10 ft
Option 2
5.36 m
17.58 ft
Mainframe: 3.66 m
12 ft
Option 3
6.27 m
20.58 ft
Mainframe: 4.57 m
15 ft
5-sectionOption 1
5.26 m
17.25 ft
Mainframe: 3.66 m
12 ft
Option 2
Mainframe: 6.1 m
20 ft
Mainframe: 4.57 m
15 ft

Transport height

Rigid frame
Rigid over-center fold
3-sectionOption 1
3.3 to 4.2 m
10.83 to 13.75 ft
Mainframe: 3.05 m
10 ft
Option 2
3.28 to 5.05 m
10.75 to 16.58 ft
Mainframe: 3.66 m
12 ft
Option 3
3.89 to 5.36 m
12.75 to 17.58 ft
Mainframe: 4.57 m
15 ft
5-sectionOption 1
4.37 to 4.98 m
14.33 to 16.33 ft
Mainframe: 3.66 m
12 ft
Option 2
4.4 to 5.3 m
14.42 to 17.42 ft
Mainframe: 4.57 m
15 ft

Operation depth

Operating speed

Horsepower required

Depth control

Option 1TruSet Tillage In-cab controls and Single-point crank-adjust
Option 2Single-point crank-adjust
Option 3

Hydraulic requirements

Standard
Option 1
Option 2

Electrical requirements

Standard
Option 1
Option 2

Hitch

Frame

TubingHigh strength, box beam steel cross tubes: 10.2x10.2 cm
4x4 in.
End tubes, patented 4-bar tube-through-tube frame design, welded construction: 5.08x12.7 cm
2x5 in.
Number of ranks
Fore-and-aft340.4 cm
134 in.
Underframe clearanceRigid and TruPosition: 71.1 cm
28 in.
Spring-reset and TruDepth: 81.3 cm
32 in.

Standard spacings

Standard options

Option 1Spec
3.2x5.08x81.3 cm
1.25x2x32 in.
Maximum operating depth
20.3 cm
8 in.
Underframe clearance
81.3 cm
32 in.
Spacing
30.5 cm
12 in.
40.6 cm
16 in.
Spring-reset
Option 2Spec
3.2x5.08x71.1 cm
1.25x2x28 in.
Trip height
25.4 cm
10 in.
Maximum operating depth
30.5 cm
12 in.
Underframe clearance
71.1 cm
28 in.
Spacing
30.5 cm
12 in.
40.6 cm
16 in.
TruPosition
Option 3Spec
3.2x5.08x81.3 cm
1.25x2x32 in.
Trip height
27.9 cm
11 in.
Maximum operating depth
30.5 cm
12 in.
Underframe clearance
81.3 cm
32 in.
Spacing
30.5 cm
12 in.
40.6 cm
16 in.
TruDepth
Option 4

Ground-engaging components

Wheels

Centerframe depth control wheels and tiresOption 1
Drawn Rigid: Castering Front and Walk-Over Tandem Rear with (6) IF280/70R15 134D Tires
Option 2
3-section: 6.4 to 8.7 m
21 to 28.7 ft
Center Frame - 10 ft
3.05 m
Castering Front with (2) IF280/70R15 134D Tires and Single Rear with (2) IF 320/70R15 144D Tires on Center Frames
Option 3
3-section mainframe of: 6.7 to 10.3 m
22 to 33.67 ft
(3.7-m [12-ft] Center Frame)
Castering Front and Walkover TandemTM Rear with (6) IF 280/70R15 134D Tires on Center Frames
Option 4
3-section: mainframe: 10.7 to 11.4 m
35 to 37.25 ft
(3.7-m [12-ft] Center Frame)
0 through 11.79 m
Castering Front and Walkover TandemTM Rear with (6) IF 280/70R15 134D Tires on Center Frame
Option 5
5-section: 13.4 to 16.8 m
44 to 55 ft
Castering Front and Walk-over™ Tandem Rear with (6) IF 320/70R15 144D Tires on Center Frames
Option 6
5-section: 18.6 m
61 ft
Castering Front and Walk-over™ Tandem Rear with (2) IF 320/70R15 144D Tires on Center Frames (4) 285/70R19.5
Wing frame wheels and tiresOption 1
3-section: (6) 11L-15FI Load Range D
Option 2
5-section: 13.4 to 16.8 m
44 to 55 ft
Castering Front with (2) 11L-15FI Load Range D and Walk-over™ Tandem Rear with (4) 12.5L-15FI Load Range F on Inner Wing Frames
Castering Front and Walkover Tandem Rear with (6) 11L-15FI Load Range D on Outer Wing Frames
Option 3
5-section: 18.6 m
61 ft
Castering Front (2) 280/70R15 and Walk-over™ Tandem Rear with (4) 320/70R15 on Inner Wing Frames
Castering Front and Walk-over™ Tandem Rear with (6) 280/70R15 on Outer Wing Frames
Stabilizer wheels

No basket harrows

Option 1
Option 2
Option 3

Rolling basket harrow

Option 1
Option 2
Option 3

Rear hitch

Tubing sizeRectangular box construction: 7.62x12.7 cm
3x5 in.
TelescopingYes
Tongue weight rating45.4 kg
100 lb
GVW10,000
Wiring harness for transport lightsincludes Y-harness, allowing both the 2430 and towed implement lights to work simultaneously
Hydraulic hoses and couplersAvailable as field attachment

Warranty

Additional feature

Opton 1Rear Attachment Options:
-Coil-tine Harrow
-Hydraulic Knife-edge Rolling Basket
Option 2
Option 3
Option 4
Option 5

Additional information

Offers & Discounts

No current offers.

Videos