There is one standard blade pan for all four sizes of the RC20 Series Rotary Cutters. The blade pan is stamped instead of fabricated and is statically balanced to reduce vibration.
The blade bar is thicker for added durability.
The front deck and deflector support are flush with the deck on the RC20 Series Rotary Cutters. This allows water and debris an unrestricted exit off the top of the deck.
These deflectors are available in:
Choose a laminated or solid rubber rear tire for the RC20 Series Rotary Cutter. Both are puncture resistant.
The laminated tire is longer lasting and provides more support when working in sandy or lighter soil conditions.
Adjusting the cutting height is easy. Along with adjusting a tractor's three-point linkage, simply move the support bar to the desired cutting height.
The RC20 Series Rotary Cutters go as low as 1.5 in. or as high as 9 in.
The RC20 Series Rotary Cutters have a lower lip (Z-profile), which extends from the skid shoes to where the apron opens up. This Z-profile increases the overall durability and strength of the rotary cutter.
The iMatch system converts a tractor's 3-point hitch to fixed hooks and attaching points for a super-quick connection. (The iMatch hitch is sold separately.)
The lower hitching point on the RC20 Series Rotary Cutter accommodates a reversible front hitch for smaller or older tractors.
The round-back deck design on the RC20 Series Rotary Cutter enables easy maneuvering into tight corners and around trees, fences, and other hard-to-reach areas.
|Select up to 4 models to compare specifications|
Series Rotary Cutters
|Overall width||129 cm|
|Overall length||220 cm|
|PTO horsepower||13-33 kW|
|Tractor PTO||540 rpm|
|PTO category||ASAE 3|
|Type||Shear bolt or slip clutch|
|Category||Cat. 1, adaptable to Cat. 2|
|Shape||Flat-open round back|
|Cutting width||122 cm|
|Cutting height||4-23 cm|
|Cutting diameter||0-2.5 cm|
|Cutting chamber depth||19 cm|
|Tip speed||66.5) m/s|
|Type||Heat treated, suction|
|Type||Solid rubber or laminated|
|Diameter laminated||381 mm|
|Width laminated||95 mm|
|Diameter rubber||381 mm|
|Width rubber||95 mm|
|Time period||1 year|