Overview
Designed exclusively for specially trained fire, rescue, and emergency personnel, the STIHL MS 462 R C-M Rescue features the remarkable OILOMATIC STIHL RAPID Duro Rescue Chain (RDR) capable of cutting through glass, sheet metal, roofing, wood, and a wide variety of other materials encountered during rescue operations. Not only is the STIHL 462 R C-M Rescue lightweight, it also features anti-vibration buffer mounts and an adjustable automatic bar and chain oiler. A depth limiter allows for rapid depth-controlled cutting for the toughest of applications, such as roof venting and technical entry, while a muffler guard plate limits the amount of debris on the muffler. The extra-large starter handle enables easier starting while wearing large protective gloves. When seconds count, professional emergency personnel count on STIHL.
Features
Adjustable Automatic Oiler
The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
Anti-Vibration System
STIHL has a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
Decompression Valve
The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
Ematic™ Lubrication System
The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
High-Tech Polymer Housing
Housings are lightweight, withstand greater impact, and are corrosion-resistant.
MS-Wrap Handle (R)
Saw can be used in multiple positions for felling or limbing with hands in the proper positions.
Master Control Lever™
The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
Pre-Separation Air Filtration System
This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
STIHL ElastoStart™
The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
STIHL M-Tronic™
This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
Side-Access Chain Tensioner
The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
Throttle Trigger Interlock
This safety feature must be depressed before the trigger can be activated.
Toolless Fuel and Oil Caps with Retainers
Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
Specifications
| Bar length | 20 " |
| Device weight without refuelling | 14.3 lb |
| System weight without refuelling | 8.20 kg |
| Displacement | 4.4 cu-in |
| Power | 4.40 kW |
| Engine power | 6.00 HP |
| Power-to-weight ratio | 1.50 kg/kW |
| Groove width | 63 " |
| Saw chain pitch | 3/8" |
| Device length with bumper spike | 490 mm |
