×
Quick Used Equipment Filter












used search tag
Total: $0.00
Go to Cart

John Deere 1775 Flex

Drawn Planter


  • 12 rows on 30-in. spacing
  • Available in 1.6-bu. or 3-bu. MaxEmerge™ 5 row unit
  • Insecticide option for 1.6-bu.
  • 2-section frame flexes 20 degrees up & 30 degrees down


Features


Advance with MaxEmerge™ 5 advantages

MaxEmerge 5 bundles the best of MaxEmerge XP and Pro-Series™ XP row-units to give you a unique planter solution. With more options and configurations, you’ll get difference-making versatility that easily adapts to your ag management plan.

 

It starts with optimal seed population that drives yield potential. An improved double eliminated helps achieve your desired population with a ride range of crop sizes. Improved side-hill performance of up to ¼ degree ensures you receive the full value of each seed when planting on terraces or rolling terrain. The vacuum air source from the Central Commodity System (CCS™) tank in the meter provides a debris-free environment for increased meter efficiency.

MaxEmerge 5 with 56-L (1.6-bu) hopper plus insecticide MaxEmerge 5 with 56-L (1.6-bu) hopper plus insecticide
MaxEmerge 5 with mini-hopper on CCS™ machines only MaxEmerge 5 with mini-hopper on CCS™ machines only

The MaxEmerge family of row-units have never seen a more versatile and efficient design until the MaxEmerge 5. The 5-family row-units improve productivity, increase uptime and lower the cost of ownership like never before.

 

The MaxEmerge 5 row-unit was designed for improved performance and serviceability.

Easily access the meter Easily access the meter

Serviceability and changing crops have always been a focus of downtime and potential seed loss. The MaxEmerge 5 meter (shown on the right) is accessible without having to remove the box. The design allows large hoppers to be cleaned out the same as mini-hoppers, simply by opening the meter dome and catching the seed as it falls out. 

MaxEmerge 5 vacuum seed meter MaxEmerge 5 vacuum seed meter

The vacuum meter system gently pulls and holds individual seeds to the holes of the seed disk for population control and spacing accuracy, equaling better crop stands and profit. Vacuum seed meters can plant a wide variety of crops and seed types by simply changing seed disks and adjusting vacuum level. Vacuum seed meters are available for planters with MaxEmerge 5 row-units.

 

Additional features of the vacuum seed meter include:

  • One moving component (the seed metering disk) for minimum maintenance requirements
  • Meter located at each row-unit for accurate seed delivery
  • Good hopper seed flow characteristics for longer operating time per hopper fill
  • Low airflow in meter so seed treatments are not removed
MaxEmerge 5 seed pool MaxEmerge 5 seed pool

The MaxEmerge 5 meter shape has also been redesigned for better seed flow. The mini-hopper design allows the planter to successfully operate on side hills up to 14 degrees.

Vacuum meter hub and latching handle
MaxEmerge 5 vacuum meter with disk MaxEmerge 5 vacuum meter with disk

Both the MaxEmerge 5 vacuum meters are equipped with a heavy-duty hub spring and disk latching handle. The spring ensures the seed disk stays properly positioned when operating flat-style seed disks and higher vacuum levels. Proper seed disk positioning means repeatable seed singulation, time after time. The disk-latching handle is designed for easy operation and effortless seed disk changeover. The hub is also machined to tight tolerances to further ensure alignment of metering components.

Vacuum meter seed disks

The ProMax 40 Flat Disk is a flat-disk planting solution field-proven to work since 1991.

Flat-style and cell seed disks shown Flat-style and cell seed disks shown

The unique cell disk design allows planting a variety of seed sizes without any additional parts or individual meter adjustments. Another advantage of cell-type seed disks is the lower vacuum requirement compared to flat-style seed disks. Lower vacuum levels mean less hydraulic demand from the tractor. Most planting conditions call for a flat disk, if you are limited in hydraulic capacity, cell disks are recommended.  

Operating characteristics of vacuum seed meter
Operating speed with seed tube technology Operating speed with seed tube technology

The vacuum seed meter can operate at faster planting speeds than mechanical meters. However, planting accuracy will be influenced by seedbed conditions and the operating characteristics of the seed meter. Rough seedbeds and fast planting speeds (above 8.9 km/h [5.5 mph]) typically deteriorate seed placement accuracies when using seed tube technology.

 

The chart illustrates the effect operating speed has on population when using the vacuum meter. The operating band (color area) illustrates how the vacuum meter performs in relation to the desired population (indicated by horizontal line). The width of the band is due to various sizes and shapes of seeds and planting rate variations.

 

When operating on slopes above 15 degrees, increased or decreased population may result. To minimize this effect, reduce speed and consider using a flat style seed disk with increased vacuum level.

ProMax 40 Flat Disc ProMax 40 Flat Disc

The design of the ProMax 40 Flat Disk position allows seed to be released from the optimum position above the seed tube. The flush-face seed tube allows the seed to drop uninterrupted through the tube.

 

The ProMax 40 Flat Disk utilizes flat holes and a higher vacuum level to ensure every hole is populated with a seed. A double eliminator gently removes multiple seeds at each hole for precise population control. A knockout wheel makes certain that each hole is clear of any debris after the seed is released from the disk.

Hopper shutoff Hopper shutoff
#

Also, to help with meter access of 56-L and 106-L (1.6-bu and 3-bu) hoppers the hopper shutoff feature was added. With the shutoff engaged, the meter cover can be opened without first having to remove all the seeds from the hopper. Lever down, the seed flow is on, lever horizontal and the seed flow is off.

MaxEmerge 5 mini-hopper MaxEmerge 5 mini-hopper
#

There are significant changes to the MaxEmerge 5 mini-hopper. One update is the straight feed from the CCS hose to the mini-hopper to ensure a continuous free flow of seeds. This design change reduces the potential for plugging issues with larger seed size and the use of seed treatments. By drawing air from the CCS tank, the vacuum source is cleaner, preventing meter debris buildup.

Rubber tire closing system Rubber tire closing system
Cast wheel closing system Cast wheel closing system

Rubber tire closing systems are used for most conventional, minimum-till, and no-till planting conditions. The spacing between the wheels is adjustable so the closing system can meet the needs of those who want to plant small seeds at shallow depths.

 

The wheels can also be staggered fore and aft to enhance residue flow. Four levels of spring force are available and are easily set with the integrated T-handle adjustment. A lower force spring can be obtained from parts, if a lower amount of force is required.

 

Additional closing wheel options include:

  • Cast closing wheels for tough-to-close conditions
  • Disk closing, for shallow planting depths
  • Closing wheel frame less wheels for growers desiring to use aftermarket closing wheels
Double eliminator
Flat seed disc and double eliminator Flat seed disc and double eliminator

For difficult to singulate seeds, a flat seed disk and double eliminator is a viable alternative to traditional cell-type seed disks. By design, a flat seed disk requires higher levels of vacuum than a cell-type disk because there is no pocket or cell to hold the seed. The higher vacuum level will pull more than one seed to the holes in the seed disk. The double eliminator is set to cover a portion of the hole in the seed disk and is the mechanism to knock multiple seeds away as the disk rotates.

 

Double eliminators are required with flat-type seed disks only and should not be used with cell-type seed disks. The knockout wheel is also recommended in conjunction with the double eliminator and flat seed disk to ensure seed is ejected from the disk.

 

Flat and celled type seed metering disks are available to allow planting a wide variety of seed types.

  • Corn (field, popcorn, or sweet corn)
  • Soybeans
  • Cotton
  • Sorghum
  • Sugar beets
  • Sunflowers
  • Edible beans/peas
  • Peanuts
  • Melons, squash, cucumbers

Mini-hopper row-units, which are used only with the CCS, are compatible only with crops that the CCS is approved to plant.

  • Corn
  • Popcorn
  • Sweet corn
  • Soybeans
  • Sunflowers
  • Sorghum
  • Cotton

NOTE: Due to small seed size and low planting populations, sugar beets can be planted with mini-hopper style meters by adding hopper extensions and not using the CCS tank. These hopper extensions can also be used for planting test plots.
 

Ductile iron-cast shank Ductile iron-cast shank

Ductile iron casting is a unique high-tech process that produces a single-piece row-unit shank this enables alignment from the seed trench to the closing wheel.

 

The row-unit head is also designed using the ductile iron-casting process. The row-unit head provides the mating joints between the row-unit parallel arms and the row-unit shank. It is also the upper attaching point for the seed meter and seed hopper.

 

Ductile iron casting of the row-unit shank and head assembly provides a row-unit that is 25 percent stronger than other competitive welded row-units.

Tru-Vee opener blade Tru-Vee opener blade

One of the trademark capabilities of John Deere planters has always been the ability of the Tru-Vee openers to provide an ideal seed furrow.

 

The thickness of the Tru-Vee opener blade is 3.5 mm (0.14 in.) this blade thickness will provide extended wear life.

 

The MaxEmerge 5 row-unit also provides better Tru-Vee opener bearings for longer life. The double-row ball bearing provides up to three times the wear life as the single-row bearing.

Depth adjustment T-handle Depth adjustment T-handle
#

John Deere planters provide consistent seed depth control in all field conditions. Depth control is a function of the Tru-Vee openers, the downforce system, and the gauge wheel assembly.

 

The gauge wheel itself is made of durable nylon composition with a concave profile. This profile gently firms the sides of the seed furrow, ensuring a well-defined trench. The shape reduces rocks and residue being picked up and thrown onto the drive chains and row-units, and helps to prevent rooster tailing of soil.

 

The bolt-through design utilizes an open bearing in the gauge wheel that allows an attaching bolt to pass through the wheel to the threaded hole in the gauge wheel arm. This simple bolt-through design provides for a positive attachment of the gauge wheel to the gauge wheel arm and allows quick removal of the gauge wheel for service.

 

Adjustability of the row-unit is critical to good performance. More available downforce options than any row unit in the industry

  • Adjustable heavy-duty downforce, four settings, 0 kg (0 lb), 57 kg (125 lb), 113 kg (250 lb), and 181 kg (400 lb) of downforce
  • Pneumatic downforce, infinitely variable from 0 to 181 kg (0 to 400 lb) of downforce
  • Active pneumatic downforce adjusts automatically for changing ground conditions from 0 to 181 kg (0 to 400 lb) of downforce
Row cleaner options to meet residue management needs

Crop yields have increased through the years along with the amount of residue left in the field after harvest. At the same time, tillage practices have changed, including different tillage operations which maintain large amounts of surface residue, and even no-till practices. Row cleaners are an essential tool in managing this increased amount of residue.

 

John Deere seeding group offers a variety of row cleaner options to meet the needs of a producer's operation. Compatibility varies by model, row spacing, and other planter equipment.

Screw-adjust, unit-mounted row cleaner
Screw-adjust, unit-mounted row cleaner Screw-adjust, unit-mounted row cleaner

The screw-adjust, unit-mounted row cleaner is mounted directly to the face plate of the row-unit, placing the ground engaging components just in front of the row-unit opener blades and depth gauge wheels. This close proximity allows the gauge wheels to control the depth of the row cleaner as well as the row-unit. This compact design also allows greater compatibility with fertilizer openers and other planter attachments.

 

SharkTooth® wheels are standard equipment on the unit-mounted row cleaner. The swept-tooth design of the wheel provides a clear path for the row-unit openers while resisting residue buildup on the wheel. The screw adjustment knob is accessible through the top of the parallel arms, providing convenient access for adjustments. The row cleaner can be adjusted in 1.6-mm (1/16-in.) increments, providing plenty of flexibility to meet the needs of changing conditions.

Floating row cleaner with unit-mounted coulter
Floating row cleaner with unit-mounted coulter Floating row cleaner with unit-mounted coulter

The floating row cleaner allows a row cleaner to be used in conjunction with a unit-mounted coulter. This combination is often desired in heavy residue loads and reduced tillage planting conditions. The row cleaner provides a clear path for the row-unit, while the unit-mounted coulter helps penetrate tough soil conditions.

 

Accommodating the unit-mounted coulter means the residue wheels are farther forward from the row-unit face plate than in the case of the screw-adjust row cleaner. To maintain performance, this row cleaner has the capability to float above a defined minimum depth.

 

Standard depth-gauging bands on the wheels allow the row cleaner wheels to float independently of the row-unit openers, allowing both to perform in varying terrain. The unit may also be set in a fixed position by simply pinning through the bracket if desired. This row cleaner also features SharkTooth wheels as standard equipment.

 

The floating row cleaner and unit-mounted coulters are available on many planters as factory-installed equipment.

NOTE: Screw-adjust row cleaners are not compatible with MaxEmerge™ 5e row-units with long parallel arms.

 

NOTE: DB models have the option for either unit-mounted coulter, screw-adjust row cleaners, or pneumatic row cleaners (only compatible with MaxEmerge 5e or equipped ExactEmerge™ models). The DB60T is only available with a less row cleaner option.

 

SharkTooth is a trademark of Yetter Manufacturing, Inc.

Seed variable-rate drive provides the ultimate planting productivity

Seed variable-rate drive provides the ultimate planting productivity by utilizing one, two, or three hydraulic motors (varies by model) to turn the seeding drive shaft. Hydraulic control of the seeding drive allows for on-the-go seeding rate changes right from the display mounted inside the tractor cab. Combine this seeding flexibility with the map-based planting option, and seeding rates adjust automatically based on the prescribed map. 

 

Variable-rate drive offers the following advantages over common, ground, or contact-tire drive systems: 

  • Rate changes are almost instantaneous; no ramp up or ramp down of system as in some competitive systems
  • Permits the producer to match seed population based on different soil types or irrigation practices
  • John Deere design provides added operator safety by eliminating any possible drive creep found in some competitive variable-rate drive systems
1755 equipped with variable-rate drive 1755 equipped with variable-rate drive
1765NT equipped with variable-rate drive 1765NT equipped with variable-rate drive

Single- or dual-motor systems for variable-rate drives are available for all John Deere planters except the 1785 Rigid Frame. Variable-rate drive is available as a factory-installed option for all applicable planter models.

Single- or dual-motor systems are available as field-installed attachments for most planter models; however, a three-motor variable-rate drive field-installed attachment is not available.

Seed variable-rate drive requires the SeedStar™ monitor and a radar input signal. Either tractor or planter radar may be used. Planter radar is ordered separately.

 

NOTE: Peanut seed meter disks require the variable-drive transmission.

Granular fertilizer systems
Granular fertilizer hopper and transmission
Granular fertilizer hopper and opener Granular fertilizer hopper and opener

Granular fertilizer is available for 1755, 1775, and 1785 Planters. Fertilizer hoppers/tanks and selected other equipment may not be installed to facilitate shipping. Fertilizer attachments place fertilizer only on 76.2-cm, 91.4-cm, or 96.5-cm (30-in., 36-in., or 38-in.) spacings. Some planter frame and row spacing combinations result in the opener offset 10.1 cm to 15.2 cm (4 in. to 6 in.) from the centerline of the Tru-Vee opener.

 

Hoppers hold approximately 249.5 kg (550 lb) of fertilizer for longer operating time between fill-ups. One hopper feeds two rows. Hopper lids provide a large opening for fast filling with less spillage. Hoppers pivot for easy dumping and cleaning. 

 

The transmission (two on 1775) has 24 sprocket combinations in consistent 6 percent increments to allow operators to apply fertilizer at the desired application rate. Depending on which auger is selected, a wide range of fertilizer rates can applied from 52.7 kg/ha (47 lb/acre) to 803.7 kg/ha (717 lb/acre). It requires openers or a surface application bracket.

Augers for granular fertilizer system

Low-, regular-, or high-rate feed augers are required to complete the granular fertilizer system. Augers move fertilizer from the fertilizer boxes to the opener. Regular- or high-rate augers are matched with the opener style selected and are available as a factory-installed option or as an attachment for field conversion. Low-rate augers are only available as an attachment for field conversion.

 

For 76.2-cm (30-in.) rows, the approximate rate of application is as follows:

 

For 96.5-cm (38-in.) rows, the approximate rate of application is as follows:

  • Low-rate augers – 41.5-208.5 kg/ha (37-186 lb/acre)
  • Regular-rate augers – 82.9-418.1 kg/ha (74-373 lb/acre)
  • High-rate augers – 124.4-626.6 kg/ha (111-559 lb/acre)

 

NOTE: Weight metered may vary from that indicated because the fertilizer attachment will meter by volume not by weight and because of differences in fertilizer density.

1755 and 1785 granular fertilizer openers
Granular fertilizer opener Granular fertilizer opener

Frame-mounted, double-disk openers and frame-mounted, single-disk openers for granular fertilizer are available on the 1755 and 1785 Planters. The frame-mounted, single-disk opener is available with a regular spout or cast spout. Fertilizer openers place the granular fertilizer into the soil for maximum plant uptake and are adjustable. Single-disk fertilizer openers are required for no-till, but are also suitable for conventional and reduced tillage. Double-disk fertilizer openers should only be used in conventional and reduced tillage conditions. 

  • Single- and double-disk openers are compatible with frame-mounted coulters.
  • Single-disk opener with cast spout is recommended for all soil conditions because it keeps soil from flowing into the furrow before fertilizer is delivered.
  • The gauge wheel on single-disk openers will help gauge fertilizer application depth and minimize soil disruption.
  • On 1755 8Row30 Planters, due to frame limitations, the granular fertilizer systems with single-disk openers can place fertilizer no closer than 12.7 cm to 15.2 cm (5 in. to 6 in.) to the seed furrow on rows 4 and 5.
1770 granular fertilizer openers

Frame-mounted, single-disk fertilizer openers with cast spout are utilized on the 1775 12Row30 Planter. These openers are ideal for both conventional and no-till. The openers are adjustable to place the fertilizer in the soil next to the seed furrow for ideal nutrient placement and maximum plant uptake. A single gauge wheel allows the opener to follow the contour of the ground for ideal fertilizer depth placement. Single-disk fertilizer openers are compatible with frame-mounted coulters.

Tire contact drive system
1765NT tire contact drive system 1765NT tire contact drive system

The tire contact drive for mechanical seed transmissions is a great fit for the mid-to-large planter operator concerned with quick transport capabilities, lower maintenance, and positive seed meter drives. The tire contact drive system is a simple, reliable, and efficient way to power seed transmission and meters.

 

The tire contact system drives the seed transmission mounted above the inner planter ground drive tire. A turf tire engages the ground drive tire when the planter is lowered, automatically turning the seed transmission and seed meters. Automatic drive disconnect occurs when the planter is raised and the turf tire separates from the ground-engaging tire. The system eliminates clutches, countershafts, and manual transport disconnects needed on direct ground drive systems. Drive chains and sprockets are moved up and out of the soil and residue zone for excellent reliability.

Tire contact drive systems are base equipment on the 1745, 1765, 1765NT, 1775 12-Row, and 1785 Planters. Contact between the ground-engaging tire and seed transmission tire is positive. On all models mentioned, a spring set applies downforce of the turf tire assembly onto the ground-engaging tire. System slippage is also minimized because the planter drive tires track in the tractor tire tracks. Frame designs differ (such as tire width) and the following different downforce requirements exist:

  • 1765 8-Row drives have 207.3 kg (457 lb) of downforce.
  • 1765 and 1775 12-Row drives have 254 kg (560 lb) of downforce. 

The 1745 model uses one front-mounted seed transmission, and if the planter is equipped with fertilizer, another front-mounted transmission is utilized. The 1765 model uses one rear-mounted seed transmission. However, if the planter also has the fertilizer option, there is another rear-mounted transmission for the fertilizer drive. The 1785 Rigid Planters utilize one front-mounted seed transmission, and if the planter is equipped with the liquid fertilizer option, another front-mounted transmission is utilized. The 1775 12-Row Planter utilizes two rear-mounted seed transmissions. Another rear-mounted transmission is used if the planter has the fertilizer option.

John Deere Connected Support™ prevents downtime and efficiently resolves issues with revolutionary technology-based solutions
Connected Support technology Connected Support technology

When you buy John Deere equipment, you expect reliability. You also know that problems can happen, and a product is only as good as the support behind it. That’s why John Deere equipment is prepared with technology that senses potential issues and can alert you and your dealer promptly—in the cab or anywhere you are.

John Deere Connected Support is a revolutionary change to support that leverages technology and the connectivity of JDLink™ telematics to prevent downtime and resolve problems faster. These tools decrease downtime by an average of 20 percent, enabling faster responses to unexpected problems and reducing technician trips to your machine. For some issues, unplanned downtime can even be prevented altogether through prediction of the issue.

With your permission, John Deere Connected Support:

  • Keeps you running by monitoring machine health and promptly alerting you and your dealer of issues
  • Saves time by remotely viewing in-cab displays, reducing trips to the machine
  • Reduces or even eliminates technician trips to a machine through remote diagnostic and remote software reprogramming capabilities
  • Connects experts with the information needed to respond to downtime faster and prevent it altogether

With more than a decade of experience leveraging connectivity to solve problems, no one else has the experience, tools, and knowledge to keep you running as John Deere and your John Deere dealer can. Connected Support is an in-base feature on all John Deere products with factory- or field-installed JDLink.

Specs & Compare


Rows and Row Spacing

1775 Flex
Current Model
Number of rows12
Row spacing30 in.
76 cm

Frame

Fold configurationFront-fold
Frame tube size17.8 x 17.8 cm
7 x 7 in.
Fold-and-go from tractor cabManual wing lock pin
Flexibility2-section flex frame, 20 degrees up, 30 degrees down

Hitch

BaseTwo point hitch for Cat.II or Cat.III with Quick Coupler only
OptionalNA
Rear hitchNA

Lift System

TypeWheel module
Number of cylinders8

Tires

Base9.5L x 15 in. F1 load range D
OptionalNA
Quantity8

Row Units

Type
Opener
Depth gauging(2) semi-pneumatic wheels - 4 1/2 x 16 in.
AdjustmentT-handle, 1/4 to 4 depth in 1/4 increments in.
Walking wheelsOptional
Row unit seed hoppersCapacity
0.06 or 0.11 m3
1.6 or 3.0 bu
Material
1.6 - polyethylene or 3.0 - roto-molded plastic bu
Row unit down forceNon-adjustable (4 springs)
180 lb
Adjustable heavy-duty
4 settings: 0, 125, 250, 400 lb
Pneumatic
Base, Infinitely adjustable to 400 lb
Base equipment
Scrapers, opener bladesPlastic rotary
NA
Steel straight blade
Optional
Heavy-duty
Optional
Optional
Seed tube sensors
Optional
Standard
Base

Seed Meters

BaseVacuum
OptionalPlateless
Finger pickupOptional
Radial bean meter
Central Commodity SystemSeed capacity
NA
NA

Drive System

BaseTire contact
Optional1 or 2 motor hydraulic variable rate drive
Number of drive wheels1 for seed transmission and 1 for dry fertilizer
Drive wheel disconnectAutomatic
Counter shaft7/8 hex in.
Drill shaft7/8 hex in.
Seed transmissionTire contact
Transmission combinations50 sprocket combinations

Markers

TypeTri-fold
ControlBase
Independent of lift
Optional
Connected to lift
Independent of lift or connected to lift
Marker diskBase
Notched w/depth gauging band - 16 in.
Optional
Marker arm gauge wheel
Shear bolt protectionBase equipment
Less marker optionOptional

Closing System

Rubber tire closing systemWheel
(2) rubber tires w/nylon wheel - 1 x 12 in.
Position
In-line or staggered
Adjustment
T-handle
Down force
5 position 0-145 lb
Alignment
Adjustable side to side
Base
Cast iron closing systemWheel
(2) cast iron wheel - 1 x 12 in.
Position
In-line or staggered
Adjustment
T-handle
Optional

Herbicide and Insecticide

Insecticide only hopperOptional -- capacity, 70 lb
Herbicide only hopperNA
Insecticide and herbicide hopperOptional -- split hopper, each side - 35 lb

Liquid Insecticide System

System availableNA
Tank capacityNA

Seed Monitor System

Base
Optional

Tillage Attachments

Unit-mounted coulterOptional
Frame-mounted coulterOptional
Bubble bladeOptional
.63-in. fluted blade (25 flutes)
.7-in. fluted blade (13 flutes)
1-in. fluted blade (8 flutes)
Row tillage support hangerOptional
Tine tooth
Cons. furrower w/ leading cutout blade
V-wing bed sweepsNA
Row cleaner
Row cleaner - unit-mounted coulter
Row cleaner - unit-mounted DD fert. openerOptional

Fertilizer

Onboard / towed / tractor tanksNA
Tank capacityNA
Fixed-rate applicationNA
Variable-rate applicationNA
Pump typeNA
Pump rateNA
Fertilizer opener typeFrame-mounted
NA
Unit-mounted
NA
Flow divider distribution systemNA
Pressure manifold distribution systemNA
Dry fertilizerNumber of hoppers
6
Hopper capacity
550 lb
Base equipment

Dimensions

Transport width (with markers)15, 2 ft, in.
Transport width (without markers)
Transport length29, 6 ft, in.
Transport height3.4 m
11.25 ft, in.
Transport weight11900 lb
Transport underframe clearance
Field operation width
Field operation length

Ag Management Solutions

Map-based seedingOptional
Field documentationOptional
Parallel trackingOptional

Additional Information

Recommended tractor horsepower120 - less fertilizer, 140 - w/fertilizer hp
Recommended tractor hydraulics15514 maximum kPa
2250 maximum psi
Warranty length1 year
Date collected

Key Specs

Frame - Flexibility
Frame - Fold configuration
Number of rows
Row spacing
Row unit seed hoppers
Seed Meters

Offers & Discounts

No current offers.

Accessories & Attachments



Down Force

Down force spring (inside), non-adjustable, 40.8233 kg (90 lb) down force (1 row) - BA25958
Upforce / Downforce spring systems

Planter row-unit downforce is an important factor to ensure consistent and proper depth control. Downforce systems are used to keep the planting units from bouncing on rough seedbeds and to improve planter penetration in heavy residue and harder soil conditions. The amount of downforce required is determined by how the planter is equipped and the field conditions in which the planter is used.

 

Non-adjustable springs can also be used to apply upforce on the row-units. Upforce can be achieved by changing the orientation of the spring on the parallel arms. This upforce can be used to counteract excess

row-unit margin or extra weight cause by seed, tillage, or other attachments on the row-unit. Upforce springs will limit the maximum amount of downforce that can be place on a row-unit by the downforce system and should only be used in conditions were adequate and consistent depth control is easily maintained.

 

Non-adjustable springs in the upforce or downforce position can also be used to counteract variances in row to row. When used in conjunction with the pneumatic downforce system, non-adjustable springs can be used to provide a more consistent row-unit margin on each row by compensating for inconsistencies such as tire tracks, different row-unit tillage attachments, and other various attachments.

Non-adjustable springs
Non-adjustable springs, row-unit upforce Non-adjustable springs, row-unit upforce

A single set of springs apply approximately 90 lb of upforce / downforce per row. Two sets of springs can be used for 180 lb of force per row.

Non-adjustable downforce springs are recommended for use in conventional tilled soil for planting speeds over 5 mph and/or in rough-tilled seedbed conditions. Non-adjustable springs can be used with tillage attachments in lighter, conventional tilled soils. (Not recommended for use with unit- or frame-mounted coulter.)

Dual upforce springs 1700 TR Dual upforce springs 1700 TR
Adjustable heavy-duty springs
Adjustable, heavy-duty downforce springs Adjustable, heavy-duty downforce springs

Adjustable, heavy-duty downforce can be used to apply 0 lb to 400 lb of downforce per row and has four settings: 0 lb, 125 lb, 250 lb, and 400 lb. The adjustable, heavy-duty downforce system can be used in all planting conditions and is compatible with all tillage attachments (recommended with unit-mounted coulter, row cleaners, and unit-mounted double-disk fertilizer openers in conservation planting conditions).

NOTE: Compatible with all MaxEmerge™ Plus  planters. Vacuum planters built prior to June 1992 require updated manifold brackets (A52970) to eliminate adjustment interference.
Down force springs, dual non-adjustable, 81.6466 kg (180 lb) down force (1 row) - BA25972
Upforce / Downforce spring systems

Planter row-unit downforce is an important factor to ensure consistent and proper depth control. Downforce systems are used to keep the planting units from bouncing on rough seedbeds and to improve planter penetration in heavy residue and harder soil conditions. The amount of downforce required is determined by how the planter is equipped and the field conditions in which the planter is used.

 

Non-adjustable springs can also be used to apply upforce on the row-units. Upforce can be achieved by changing the orientation of the spring on the parallel arms. This upforce can be used to counteract excess

row-unit margin or extra weight cause by seed, tillage, or other attachments on the row-unit. Upforce springs will limit the maximum amount of downforce that can be place on a row-unit by the downforce system and should only be used in conditions were adequate and consistent depth control is easily maintained.

 

Non-adjustable springs in the upforce or downforce position can also be used to counteract variances in row to row. When used in conjunction with the pneumatic downforce system, non-adjustable springs can be used to provide a more consistent row-unit margin on each row by compensating for inconsistencies such as tire tracks, different row-unit tillage attachments, and other various attachments.

Non-adjustable springs
Non-adjustable springs, row-unit upforce Non-adjustable springs, row-unit upforce

A single set of springs apply approximately 90 lb of upforce / downforce per row. Two sets of springs can be used for 180 lb of force per row.

Non-adjustable downforce springs are recommended for use in conventional tilled soil for planting speeds over 5 mph and/or in rough-tilled seedbed conditions. Non-adjustable springs can be used with tillage attachments in lighter, conventional tilled soils. (Not recommended for use with unit- or frame-mounted coulter.)

Dual upforce springs 1700 TR Dual upforce springs 1700 TR
Adjustable heavy-duty springs
Adjustable, heavy-duty downforce springs Adjustable, heavy-duty downforce springs

Adjustable, heavy-duty downforce can be used to apply 0 lb to 400 lb of downforce per row and has four settings: 0 lb, 125 lb, 250 lb, and 400 lb. The adjustable, heavy-duty downforce system can be used in all planting conditions and is compatible with all tillage attachments (recommended with unit-mounted coulter, row cleaners, and unit-mounted double-disk fertilizer openers in conservation planting conditions).

NOTE: Compatible with all MaxEmerge™ Plus  planters. Vacuum planters built prior to June 1992 require updated manifold brackets (A52970) to eliminate adjustment interference.
Down force springs, heavy-duty adjustable regular length parallel arms, 0 to 181.437 kg (0 to 400 lb) down force (1 row) - BA28970
Upforce / Downforce spring systems

Planter row-unit downforce is an important factor to ensure consistent and proper depth control. Downforce systems are used to keep the planting units from bouncing on rough seedbeds and to improve planter penetration in heavy residue and harder soil conditions. The amount of downforce required is determined by how the planter is equipped and the field conditions in which the planter is used.

 

Non-adjustable springs can also be used to apply upforce on the row-units. Upforce can be achieved by changing the orientation of the spring on the parallel arms. This upforce can be used to counteract excess

row-unit margin or extra weight cause by seed, tillage, or other attachments on the row-unit. Upforce springs will limit the maximum amount of downforce that can be place on a row-unit by the downforce system and should only be used in conditions were adequate and consistent depth control is easily maintained.

 

Non-adjustable springs in the upforce or downforce position can also be used to counteract variances in row to row. When used in conjunction with the pneumatic downforce system, non-adjustable springs can be used to provide a more consistent row-unit margin on each row by compensating for inconsistencies such as tire tracks, different row-unit tillage attachments, and other various attachments.

Non-adjustable springs
Non-adjustable springs, row-unit upforce Non-adjustable springs, row-unit upforce

A single set of springs apply approximately 90 lb of upforce / downforce per row. Two sets of springs can be used for 180 lb of force per row.

Non-adjustable downforce springs are recommended for use in conventional tilled soil for planting speeds over 5 mph and/or in rough-tilled seedbed conditions. Non-adjustable springs can be used with tillage attachments in lighter, conventional tilled soils. (Not recommended for use with unit- or frame-mounted coulter.)

Dual upforce springs 1700 TR Dual upforce springs 1700 TR
Adjustable heavy-duty springs
Adjustable, heavy-duty downforce springs Adjustable, heavy-duty downforce springs

Adjustable, heavy-duty downforce can be used to apply 0 lb to 400 lb of downforce per row and has four settings: 0 lb, 125 lb, 250 lb, and 400 lb. The adjustable, heavy-duty downforce system can be used in all planting conditions and is compatible with all tillage attachments (recommended with unit-mounted coulter, row cleaners, and unit-mounted double-disk fertilizer openers in conservation planting conditions).

NOTE: Compatible with all MaxEmerge™ Plus  planters. Vacuum planters built prior to June 1992 require updated manifold brackets (A52970) to eliminate adjustment interference.

Meter Drive

RowCommand Clutches - Row Units with Chain Drive - BA92869
RowCommand controls seed output
RowCommand for chain drive RowCommand for chain drive

Controlling input costs and improving productivity are key producer requirements today. RowCommand is an effective, integrated John Deere solution designed to meet these intensifying needs.

 

The RowCommand system manages seed output, reduces yield drag and improves harvest capabilities on select chain-driven MaxEmerge™ XP planters.

 

NOTE: Chain-drive RowCommand is only compatible with planters equipped with pneumatic downforce systems. On planters equipped with the heavy-duty downforce springs, potential chain interference may result and is not recommended.

 

NOTE: Chain-drive RowCommand requires some modification to brackets in order to function with corn finger pickup meters. Information on the modifications needed is found in the following sales material.

 

RowCommand controls seed output by incorporating individual, low-amperage clutches inside the chain-drive gearbox. Clutches are completely enclosed within the gearbox housing to protect them from the elements and harsh operating conditions.  

 

When power is supplied, either manually or through the Swath Control Pro™ solution, clutches disengage the seed meters and the seed flow stops. Controlling seed output at individual rows reduces overplanting in point rows and maximizes seed placement when entering/exiting headlands.

Planter compatibility

RowCommand is available as an attachment for field conversion (AFC) for the following chain-drive planter models equipped with pneumatic downforce systems.

 

Planter model  Row configuration
 1720    12-row narrow, 12-row wide, and 16-row narrow 
 1760  12-row narrow
 1770  12-row narrow
 1770NT  12-row, 16-row, and 24-row narrow
 1770NT Central Commodity System (CCS™)                          12-row, 16-row, and 24-row narrow
 DB44  24Row22

 

RowCommand is also compatible and designed to fit on those model year 2003 to 2008 (serial number range 700101 - 729999) planter models listed above that do not have controller area network (CAN) based frame control or CAN-based half-width disconnect. For model year 2008 and earlier planters (serial number -729999 and below), the correct AFC bundle along with additional components (planter mainframe monitoring harness, SeedStar™ 2 controller, and CAN adapter harness) are required for RowCommand operation. 

 

For all RowCommand eligible planters equipped with a mechanical transmission, a height sensor is required in order for RowCommand functionality.

Chain-drive RowCommand and heavy-duty downforce
Chain interference with heavy-duty downforce Chain interference with heavy-duty downforce

As seen in the above image, chain interference may result when operating chain-drive RowCommand on planters equipped with short- and long- parallel arms and heavy-duty downforce springs.

 

NOTE: Chain-drive RowCommand is only compatible with planters equipped with pneumatic downforce systems. On planters equipped with the heavy-duty downforce springs, potential chain interference may result and is not recommended.

Chain-drive RowCommand with corn finger pickup meters
Bracket material removal Bracket material removal

Due to the design characteristics of the chain drive RowCommand clutch, some modification to the corn finger pickup meter drive bracket is required. As seen in the picture to the left, some material needs to be removed from the front of the meter drive bracket in order for the chain drive RowCommand clutch to have sufficient space for installation.

 

NOTE: Chain-drive RowCommand requires some modification to brackets in order to function with corn finger pickup meters.

System requirements

By design, power is only supplied to the clutch when a signal is received to stop planting. In a normal planting condition no power is supplied and the clutch is de-energized. 

 

Power for the RowCommand system is provided from the nine-pin ISO implement connector. All late-model 8X00 and 9X00 Series John Deere Tractors equipped with the nine-pin ISO implement connector are capable of supplying ample power for system operation. 

 

Along with ample system power, a GreenStar™ 2 display and SeedStar 2 monitoring is required for operation and control interface. The GreenStar 2 display is where system setup, control settings, and manual control functions are performed. 

RowCommand Clutches - Row Units with Pro-Shaft Drive - BA92842
RowCommand controls seed output
RowCommand on a Pro-Series™ row-unit RowCommand on a Pro-Series™ row-unit

Controlling input costs and improving productivity are key producer requirements today. RowCommand is an effective, integrated John Deere solution designed to meet these intensifying needs. The RowCommand system manages seed output, reduces yield drag and improves harvest capabilities on all Pro-Shaft driven row-units—on both Pro-Series XP and MaxEmerge™ XP planter.

 

RowCommand controls seed output by incorporating individual, low-amperage clutches inside the Pro-Shaft drive gearbox. Clutches are completely enclosed within the gearbox housing to protect them from the elements and harsh operating conditions.

 

When power is supplied, either manually or through John Deere Section Control, clutches disengage the seed meters and the seed flow stops. Controlling seed output at individual rows reduces overplanting in point rows and maximizes seed placement when entering/exiting headlands.

Planter models and compatibility

RowCommand is available as a factory-installed option or as an attachment for field conversion (AFC) attachment. The RowCommand system is designed for the entire list of planter models as follows.

 

NOTE: Factory installation of RowCommand will replace one-half or one-third width disconnect clutch components on the planter drive.

 

Planter model  Row configuration
 1725  12Row narrow, 12Row wide, and 16Row narrow 
 1725 Central Commodity System (CCS™)  16Row narrow, 12x2 TR
 1765  12Row narrow
 1775  12Row narrow
 1775NT  12Row, 16Row, and 24Row narrow
 1775NT CCS  12Row, 16Row, and 24Row narrow
 1795  12/23Row, 12/24Row and 16/31Row, 16/32Row
 1795  24Row20
 DB 44  24Row22
 DB 58  32Row22
 DB 60  36Row20 or 47Row15
 DB 66  36Row22
 DB 80  32Row30 or 48Row20
 DB 88  48Row22
 DB 90  36Row30
 DB 120  48Row30
 DR 16R40  16Row40
 DR 18R38  18Row38
Compatibility

RowCommand is also compatible and designed to fit on model year 2003 to 2008 (serial number range 700101 - 729999) planter models listed above that do not have controller area network (CAN) based frame control or CAN-based half-width disconnect. For model year 2008 and earlier planters (serial number -729999 and below), the correct AFC bundle attachment along with additional components (planter mainframe monitoring harness, SeedStar™ 2 or SeedStar XP controller, CAN adapter harness) are required for RowCommand operation.

 

For all RowCommand eligible planters equipped with a mechanical transmission, a height sensor is required in order for RowCommand functionality.

 

NOTE: RowCommand is compatible on MaxEmerge XP row-units with vacuum and corn-finger pickup meters. However, for Pro-Series XP row-units, RowCommand is compatible on vacuum meters only and is not compatible on corn-finger pickup meters. There is a select group of planters that might have Pro-Series XP row-units with corn-finger pickup meters in which RowCommand will not be compatible.

System requirements

RowCommand is a simple and efficient means to control individual row planting through the use of low-voltage electric clutches. Each clutch, when activated, consumes no more than 0.5 amp. 

 

By design, power is only supplied to the clutch when a signal is received to stop planting. In a normal planting condition no power is supplied and the clutch is de-energized. 

 

Power for the RowCommand system is provided from the nine-pin ISO implement connector. All late-model 8X00 and 9X00 Series John Deere Tractors equipped with the nine-pin ISO implement connector are capable of supplying ample power for system operation. 

 

Along with ample system power, a GreenStar™ 2 Display and SeedStar 2 or SeedStar XP monitoring is required for operation and control interface. The GreenStar 2 Display is where system setup, control settings, and manual control functions are performed. 

Vacuum blower - BA30876

These items can be ordered to convert planter from plate or plateless meters to vacuum meter system.

  • Vacuum pump and manifold system
  • Vacuum manifold automatic disconnect (for flex-fold planters)
  • Seed hoppers, lids, and drive
  • Vacuum seed meter disk
  • Vacuum meter assemblies
NOTE:  Order seed metering disks from ''Attachments'' section. BA26722 vacuum level sensor recommended if planter is equipped with SeedStarTM  monitoring system.

Miscellaneous

Active pneumatic downforce publications - BA31815
Active pneumatic compressor assembly Active pneumatic compressor assembly
Hydraulic motor Hydraulic motor

John Deere active pneumatic downforce makes getting the planting accuracy desired even easier. A hydraulically driven compressor works with the SeedStar™ 3 HP system and SeedStar XP system to automate downforce control. Just set the row-unit target margin value and the active pneumatic downforce system works automatically to make sure the planter maintains this value-achieving precise soil penetration, and consistent planting depth without sidewall soil compaction. This frees the operator from constantly making manual downforce adjustments as conditions change. It also allows the operator to focus on all the other planting factors that drive up yields, like seed singulation and spacing.

 

This system also offers a split rank control feature for split-row planters. On top of actively controlling the pneumatic downforce system across the planter, John Deere active downforce will control the front and rear rows of split-row planter independently. This compensates for differing downforce requirements between the ranks and will help maintain an accurate planting depth and consistent margin across all the rows.

Single-rank planters such as the 1770NT, 1790 24Row20, and Deere Bauer Planters except for the DB60 47Row15 require a compressor assembly and hydraulic hose kit to complete the field conversion. The 1790 and DB60 47Row15 Split-Row Planters require the compressor with split rank control, hydraulic hose kit, and the PDF hose kit for split rank control. Additional components maybe needed depending on model year.

Closing attachment - Drag (1 row) - BA26830
Drag closing system Drag closing system

Designed to improve seed emergence in particularly difficult soil conditions that severely bake and crust after planting. These conditions are found primarily in irrigated cotton planting areas of the southwestern United States.

 

A seed packer wheel precedes the drag and pushes seed down into the moist soil. Drag brings loose soil into seed furrow without compaction. Without the typical closing compaction, the covering soil acts like a mulch, reducing the tendency to crust for improved seed emergence.

 

Only for use in fields that are relatively level and free of residue and clods that could cause plugging.

 

NOTE: Not compatible with leveling chains, tine tooth incorporators, rear-mounted granular insecticide or herbicide attachments, seed packer wheel or insecticide diffusers.

Closing system - Cast iron closing wheels and closing wheel arm (1 row) - BA28967
Cast-iron closing wheel system Cast-iron closing wheel system

To convert planters equipped with rubber-tire closing wheels to cast-iron closing wheels.

 

May be used where rubber-tire closing wheels do not adequately close seed trench.

 

For individual cast wheels only, order AA34350 from Service Parts.

 

NOTE: Cast-iron closing wheels are not recommended in conventional tilled ground.

Closing system - Disk (1 row) - BA27006
Rubber tire closing system
Rubber tire closing system Rubber tire closing system
#

Rubber tire wheels are recommended for most conventional, minimum-till, and no-till planting conditions. Multiple levels of spring force are available, and are easily set with the integrated T-handle adjustment.

Cast iron closing wheels
Cast-closing wheels Cast-closing wheels
#

Cast-iron wheels are recommended for use in tough soil conditions where additional closing force is required.

Disk closing system
Disk closing system Disk closing system
#

The disk closing system is recommended for very shallow planting depths. Two small disks are used to gently firm soil around the seed. These disks are followed by a wide packer wheel to gently pack the soil surface. This system is not recommended for use in high residue applications.

Closing system - Rubber tire closing wheels and closing wheel arm (1 row) - BA28966
Rubber-tire closing wheel Rubber-tire closing wheel

Converts planters equipped with cast-iron closing wheels to rubber-tire closing wheels.

 

Used in all types of planting conditions.

 

For individual rubber-tire closing wheels only, order AA39968 from Service Parts.

 

Limited by their ability to close seed trench in extreme soil conditions.

 

NOTE: For wheels only, order AA39968 from Parts.

Conservation disk furrowers, right-hand and left-hand, with cutout leading blade (2 rows) - BA26105
Furrowers with solid or notched leading blade Furrowers with solid or notched leading blade

Used in tilled soil to move dry soil away from the planting unit path to plant in moist soil.

 

NOTE: Cannot be used on row spacing of less than 30 in.

 

Furrowers are used in conservation tillage conditions to sweep trash and a small volume of soil to the sides to clear a path for the planting unit.

 

Furrowers have alternating right and left-hand leading blade to assure straight planter draft.

 

Effectiveness of furrowers is limited by the trash-cutting ability of the attachment.

 

Available with two 13-in. solid blades or with a notched blade in the leading position. Leading notched blade provides improved cutting action.

 

The blade mounting bracket is adjustable to change the contact angle for improved sweeping action.

 

Depth is easily adjustable. Convenient pointer and scale give easy-to-read reference point.

 

Furrowers are not compatible with unit or frame-mounted coulters.

 

Drive chain shields are required when using conservation disk furrower with planters that have drive/gauge wheels mounted to the rear. (Not required on 1760, 1770 12Row30 or 1780 Planters.)

Down force springs (outside), non-adjustable, 40.8233 kg (90 lb) down force (1 row) - BA23721
Upforce / Downforce spring systems

Planter row-unit downforce is an important factor to ensure consistent and proper depth control. Downforce systems are used to keep the planting units from bouncing on rough seedbeds and to improve planter penetration in heavy residue and harder soil conditions. The amount of downforce required is determined by how the planter is equipped and the field conditions in which the planter is used.

 

Non-adjustable springs can also be used to apply upforce on the row-units. Upforce can be achieved by changing the orientation of the spring on the parallel arms. This upforce can be used to counteract excess

row-unit margin or extra weight cause by seed, tillage, or other attachments on the row-unit. Upforce springs will limit the maximum amount of downforce that can be place on a row-unit by the downforce system and should only be used in conditions were adequate and consistent depth control is easily maintained.

 

Non-adjustable springs in the upforce or downforce position can also be used to counteract variances in row to row. When used in conjunction with the pneumatic downforce system, non-adjustable springs can be used to provide a more consistent row-unit margin on each row by compensating for inconsistencies such as tire tracks, different row-unit tillage attachments, and other various attachments.

Non-adjustable springs
Non-adjustable springs, row-unit upforce Non-adjustable springs, row-unit upforce

A single set of springs apply approximately 90 lb of upforce / downforce per row. Two sets of springs can be used for 180 lb of force per row.

Non-adjustable downforce springs are recommended for use in conventional tilled soil for planting speeds over 5 mph and/or in rough-tilled seedbed conditions. Non-adjustable springs can be used with tillage attachments in lighter, conventional tilled soils. (Not recommended for use with unit- or frame-mounted coulter.)

Dual upforce springs 1700 TR Dual upforce springs 1700 TR
Adjustable heavy-duty springs
Adjustable, heavy-duty downforce springs Adjustable, heavy-duty downforce springs

Adjustable, heavy-duty downforce can be used to apply 0 lb to 400 lb of downforce per row and has four settings: 0 lb, 125 lb, 250 lb, and 400 lb. The adjustable, heavy-duty downforce system can be used in all planting conditions and is compatible with all tillage attachments (recommended with unit-mounted coulter, row cleaners, and unit-mounted double-disk fertilizer openers in conservation planting conditions).

NOTE: Compatible with all MaxEmerge™ Plus  planters. Vacuum planters built prior to June 1992 require updated manifold brackets (A52970) to eliminate adjustment interference.
Fertilizer Opener, Double Disk for mounting on 3 x 7 In. Tube - Less Spout (1 Row) - BA91213
17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed 17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed
Double-disk opener assembly Double-disk opener assembly

Frame-mounted fertilizer openers are recommended for the following tillage conditions:

 

 

 Openers

Conventional 

Reduced 

 Moderate, no-till

 Moderate, double crop

 Single disk

 X

 X

 X

 X

 Double disk

 X

 X

 

 

 

Depending on the model, single-disk or double-disk frame-mounted fertilizer openers options are available to meet a wide range of operating conditions. The single-disk frame-mounted fertilizer opener is the most robust and versatile of the two frame-mounted options. 

 

There are two designs of frame-mounted single disk fertilizer openers available for planters today:

  • One design mounts to rigid frame or folding planters and utilizes a steel upper arm for secure mounting.  This style opener is shown in the right-hand picture above and has been available for a number of years.
  • The second design of frame-mounted single-disk openers is strictly for 17.8-cm x 17.8-cm (7-in. x 7-in.) frames and is for use on the 1775NT and 1795 Planters (excluding the 24Row20). This design incorporates a longer curved upper casting and is shown in the left-hand picture above.

Single-disk fertilizer openers feature a gauge wheel to:

  • Gauge fertilizer application depth
  • Minimize soil disruption

The frame-mounted, single-disk opener has the ability to be locked up in the raised position on 1795 Split-Row Planters. This eliminates excessive wear to the openers when planting soybeans with a 1795 and the openers are not utilized. There are two bundles required for updating 1795 Split-Row Planters. One bundle is used for the center frame section and the other bundle is for wing sections.

 

The frame-mounted, single-disk opener cannot be locked up in the raised position on 1775NT Planters due to frame tube and opener contact. The steel opener for rigid or folding planters (non-NT) can be raised somewhat by screwing up the spring assembly but cannot be completely raised from the soil.

 

NOTES:

  1. Single-disk openers on 8Row30 1755 frames are limited to placement of 7.6 cm to 15.2 cm (3 in. to 6 in.) off the row on rows 4 and 5.
  2. Single-disk opener is not recommended for loose, soft soil conditions unless equipped with cast spout.
  3. Single-disk opener has optional heavy-duty spring A50733 (Parts) if more down force is needed in tough no-till conditions.
  4. Double-disk opener is not compatible with frame-mounted coulter.

NOTE: Order number of opener bundles to match number of planter row units (i.e., 4Row 1755 Planter requires four BA91211 double-disk openers or two BA91212 single-disk openers).

Fertilizer Openers, Single Disk for mounting on 3 x 7 In. Tube - Less Spouts (2 Rows) - BA91214
17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed 17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed
Double-disk opener assembly Double-disk opener assembly

Frame-mounted fertilizer openers are recommended for the following tillage conditions:

 

 

 Openers

Conventional 

Reduced 

 Moderate, no-till

 Moderate, double crop

 Single disk

 X

 X

 X

 X

 Double disk

 X

 X

 

 

 

Depending on the model, single-disk or double-disk frame-mounted fertilizer openers options are available to meet a wide range of operating conditions. The single-disk frame-mounted fertilizer opener is the most robust and versatile of the two frame-mounted options. 

 

There are two designs of frame-mounted single disk fertilizer openers available for planters today:

  • One design mounts to rigid frame or folding planters and utilizes a steel upper arm for secure mounting.  This style opener is shown in the right-hand picture above and has been available for a number of years.
  • The second design of frame-mounted single-disk openers is strictly for 17.8-cm x 17.8-cm (7-in. x 7-in.) frames and is for use on the 1775NT and 1795 Planters (excluding the 24Row20). This design incorporates a longer curved upper casting and is shown in the left-hand picture above.

Single-disk fertilizer openers feature a gauge wheel to:

  • Gauge fertilizer application depth
  • Minimize soil disruption

The frame-mounted, single-disk opener has the ability to be locked up in the raised position on 1795 Split-Row Planters. This eliminates excessive wear to the openers when planting soybeans with a 1795 and the openers are not utilized. There are two bundles required for updating 1795 Split-Row Planters. One bundle is used for the center frame section and the other bundle is for wing sections.

 

The frame-mounted, single-disk opener cannot be locked up in the raised position on 1775NT Planters due to frame tube and opener contact. The steel opener for rigid or folding planters (non-NT) can be raised somewhat by screwing up the spring assembly but cannot be completely raised from the soil.

 

NOTES:

  1. Single-disk openers on 8Row30 1755 frames are limited to placement of 7.6 cm to 15.2 cm (3 in. to 6 in.) off the row on rows 4 and 5.
  2. Single-disk opener is not recommended for loose, soft soil conditions unless equipped with cast spout.
  3. Single-disk opener has optional heavy-duty spring A50733 (Parts) if more down force is needed in tough no-till conditions.
  4. Double-disk opener is not compatible with frame-mounted coulter.

NOTE: Order number of opener bundles to match number of planter row units (i.e., 4Row 1755 Planter requires four BA91211 double-disk openers or two BA91212 single-disk openers).

Fertilizer opener, double-disk for mounting on 177.8 by 177.8-mm (7 by 7-in.) tube - Less spout (2 row) - BA29504
17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed 17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed
Double-disk opener assembly Double-disk opener assembly

Frame-mounted fertilizer openers are recommended for the following tillage conditions:

 

 

 Openers

Conventional 

Reduced 

 Moderate, no-till

 Moderate, double crop

 Single disk

 X

 X

 X

 X

 Double disk

 X

 X

 

 

 

Depending on the model, single-disk or double-disk frame-mounted fertilizer openers options are available to meet a wide range of operating conditions. The single-disk frame-mounted fertilizer opener is the most robust and versatile of the two frame-mounted options. 

 

There are two designs of frame-mounted single disk fertilizer openers available for planters today:

  • One design mounts to rigid frame or folding planters and utilizes a steel upper arm for secure mounting.  This style opener is shown in the right-hand picture above and has been available for a number of years.
  • The second design of frame-mounted single-disk openers is strictly for 17.8-cm x 17.8-cm (7-in. x 7-in.) frames and is for use on the 1775NT and 1795 Planters (excluding the 24Row20). This design incorporates a longer curved upper casting and is shown in the left-hand picture above.

Single-disk fertilizer openers feature a gauge wheel to:

  • Gauge fertilizer application depth
  • Minimize soil disruption

The frame-mounted, single-disk opener has the ability to be locked up in the raised position on 1795 Split-Row Planters. This eliminates excessive wear to the openers when planting soybeans with a 1795 and the openers are not utilized. There are two bundles required for updating 1795 Split-Row Planters. One bundle is used for the center frame section and the other bundle is for wing sections.

 

The frame-mounted, single-disk opener cannot be locked up in the raised position on 1775NT Planters due to frame tube and opener contact. The steel opener for rigid or folding planters (non-NT) can be raised somewhat by screwing up the spring assembly but cannot be completely raised from the soil.

 

NOTES:

  1. Single-disk openers on 8Row30 1755 frames are limited to placement of 7.6 cm to 15.2 cm (3 in. to 6 in.) off the row on rows 4 and 5.
  2. Single-disk opener is not recommended for loose, soft soil conditions unless equipped with cast spout.
  3. Single-disk opener has optional heavy-duty spring A50733 (Parts) if more down force is needed in tough no-till conditions.
  4. Double-disk opener is not compatible with frame-mounted coulter.

NOTE: Order number of opener bundles to match number of planter row units (i.e., 4Row 1755 Planter requires four BA91211 double-disk openers or two BA91212 single-disk openers).

Fertilizer openers, single-disk for mounting on 177.8 by 177.8-mm (7 by 7-in.) tube - Less spouts (2 rows) - BA29506
17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed 17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed
Double-disk opener assembly Double-disk opener assembly

Frame-mounted fertilizer openers are recommended for the following tillage conditions:

 

 

 Openers

Conventional 

Reduced 

 Moderate, no-till

 Moderate, double crop

 Single disk

 X

 X

 X

 X

 Double disk

 X

 X

 

 

 

Depending on the model, single-disk or double-disk frame-mounted fertilizer openers options are available to meet a wide range of operating conditions. The single-disk frame-mounted fertilizer opener is the most robust and versatile of the two frame-mounted options. 

 

There are two designs of frame-mounted single disk fertilizer openers available for planters today:

  • One design mounts to rigid frame or folding planters and utilizes a steel upper arm for secure mounting.  This style opener is shown in the right-hand picture above and has been available for a number of years.
  • The second design of frame-mounted single-disk openers is strictly for 17.8-cm x 17.8-cm (7-in. x 7-in.) frames and is for use on the 1775NT and 1795 Planters (excluding the 24Row20). This design incorporates a longer curved upper casting and is shown in the left-hand picture above.

Single-disk fertilizer openers feature a gauge wheel to:

  • Gauge fertilizer application depth
  • Minimize soil disruption

The frame-mounted, single-disk opener has the ability to be locked up in the raised position on 1795 Split-Row Planters. This eliminates excessive wear to the openers when planting soybeans with a 1795 and the openers are not utilized. There are two bundles required for updating 1795 Split-Row Planters. One bundle is used for the center frame section and the other bundle is for wing sections.

 

The frame-mounted, single-disk opener cannot be locked up in the raised position on 1775NT Planters due to frame tube and opener contact. The steel opener for rigid or folding planters (non-NT) can be raised somewhat by screwing up the spring assembly but cannot be completely raised from the soil.

 

NOTES:

  1. Single-disk openers on 8Row30 1755 frames are limited to placement of 7.6 cm to 15.2 cm (3 in. to 6 in.) off the row on rows 4 and 5.
  2. Single-disk opener is not recommended for loose, soft soil conditions unless equipped with cast spout.
  3. Single-disk opener has optional heavy-duty spring A50733 (Parts) if more down force is needed in tough no-till conditions.
  4. Double-disk opener is not compatible with frame-mounted coulter.

NOTE: Order number of opener bundles to match number of planter row units (i.e., 4Row 1755 Planter requires four BA91211 double-disk openers or two BA91212 single-disk openers).

Floating Row Cleaner Combination for Unit Mounted Coulter (1 Row) - BA32910
Floating row cleaner Floating row cleaner
Floating row cleaner side view Floating row cleaner side view

When paired with a unit-mounted coulter, the floating combo row cleaner offers the ultimate solution for managing tough residue and soil conditions. The row cleaner clears the way of debris, and the coulter penetrates tough soil, opening the furrow for the row unit opener blades. The floating ability of the row cleaner allows the unit to adapt to varying terrain independently of the row unit.

Features

The floating row cleaner allows a row cleaner to be used in conjunction with a unit-mounted coulter.This combination is often desired in heavy residue loads and tough reduced tillage planting conditions. The floating row cleaner features the SharkTooth® wheel. The beveled, sharpened edge of the teeth on the SharkTooth aggressively cuts flat and standing residue in the path of the row unit. The curved tooth design sweeps a clear path for the unit mounted coulter and opener blades, and resists residue buildup.

 

When used with the unit mounted coulter, the wheels are run side-by-side. They may be operated with one wheel forward if desired, by simply relocating the wheels to existing holes on the row cleaner bracket. The wheel bearings of the floating row cleaner are sealed and require no regular maintenance.

 

Cast aluminum depth gauge bands are standard equipment on the floating row cleaner. These durable bands are mounted directly to the row cleaner wheel, and aid the row cleaner in maintaining a consistent operating depth over varying terrain. The depth gauge bands also add weight to the row cleaner, aiding penetration in tough conditions. The depth gauge bands may be removed if desired.

Adjustability

The floating row cleaner is designed with maximum terrain following flexibility in mind. The pin adjustment has multiple settings available in 6.4-mm (1/4-in.) increments. The primary method of operating is to limit the maximum depth of operation, and allow the row cleaner to float up when necessary. This is accomplished by placing the adjustment pin below the floating bracket, limiting downward travel, but permitting upward travel. 

 

It is also possible to set the row unit in a manner allowing full float. Simply place the pin in the lowest setting, allowing the depth gauge bands to determine the operating depth up and down. In some conditions, it may be desirable to pin the unit in a fixed position. This may be accomplished by simply pinning through the floating arm, fixing the row cleaner arm to the row unit and allowing the row unit to control operating depth.

Operational notes

NOTES:

  • Not compatible with any row spacing less than 76.2 cm (30 in.), except the 1790 Split-Row Planter.
  • Not compatible with Deere/Bauer or Deere/Orthman planters.
  • Drive wheel chain shields are recommended for use with row cleaner attachments.
  • Long parallel arms are required for use on:
    • 1750
    • 1760NT
    • 1770NT when used in conjunction with frame mounted fertilizer openers
    • 1790 front rank when used with frame mounted fertilizer openers
    • 1790 rear rank
  • For available long parallel arm attachments for field conversion, please click here.
  • Use of long parallel arms is recommended, but not required, when using the floating row cleaner on 1770 Flex Planters in conjunction with frame-mounted fertilizer openers. Use of long parallel arms on these machines will maximize the distance between the fertilizer openers and the row cleaner, preventing interference and maximizing residue flow.
  • Other row cleaner designs are available for use without a unit mounted coulter, or for use with unit-mounted double disk fertilizer openers.
  • Use of row cleaners and unit-mounted coulters is not recommended when surface application pre-plant herbicide is used prior to planting. when using pre-plant incorporated herbicide, the row cleaner should be adjusted to minimize soil disturbance so as not to reduce the effectiveness of the incorporated herbicide.

 

SharkTooth is a trademark of Yetter Manufacturing, Inc.

Granular chemical - Tine tooth incorporator (1 row) - BA24532
Tine tooth incorporator Tine tooth incorporator

Designed to offer full flexibility to follow ground contours and effectively mix soil and chemicals. Also levels soil and leaves it loose to further reduce the chance for crusting or erosion.

Tooth angle and penetration are easily adjusted for more or less aggressive action depending on the soil texture.

NOTE:  Not compatible with disk closing system or seed packer wheel attachment.
Granular fertilizer augers - High rate (6 rows) - BB10430

Low-, regular-, and high-rate feed augers are available to meter fertilizer in the quantity required.

 

For 76.2-cm (30-in.) rows, the approximate rate of application is as follows:

 

 Low-rate augers  Regular-rate augers   High-rate augers  
 52.7 to 269 kg/ha (47 to 240 lb/acre)  105.4 to 533.5 kg/ha (94 to 476 lb/acre)  183.8 to 803.7 kg/ha (164 to 717 lb/acre)

  

For 101.6 (40-in.) rows, the approximate rate of application is as follows:

 

 Low-rate augers  Regular-rate augers   High-rate augers  
 41.5 to 208.5 kg/ha (37 to 186 lb/acre)  82.9 to 418.1 kg/ha (74 to 373 lb/acre)  124.4 to 626.6 kg/ha (111 to 559 lb/acre)

 

NOTES:

  1. Larger amounts will be applied to narrower row spacings and smaller amounts will be applied to wider row spacings. 
  2. Weight metered may vary from that indicated because the fertilizer attachment will meter by volume, not by weight, and because of differences in fertilizer. 
  3. Multiples of the augers are required for 8-row, 12-row, and 16-row applications.
Granular fertilizer hopper - BA25445
Dry fertilizer attachment Dry fertilizer attachment

Hoppers hold approximately 550 lb of fertilizer for longer operating time between fill-ups.

 

Hopper lids provide large opening for fast filling with less spillage.

 

Hoppers pivot for easy dumping and cleaning.

 

Transmission (two on front-fold model) has 24 sprocket combinations in consistent 6 percent increments to allow applying fertilizer at the desired application rate.

 

Includes hoppers, transmissions, and drives. Requires augers and openers or surface application brackets.

NOTES:

  1. Warning and tail lamps recommended for planter since fertilizer attachment could obscure tractor tail and/or warning lights. 
  2. 1780 fertilizer placement on 30-in. row spacing only. 
  3. BA91309 can also be used on an 11-row planter; only six rows will fertilize. 6-row wide requires one A47389 coupler and one A47400 coupler from Parts.
  4. When adding to a planter with variable rate drive (VRD), additional drive components for the fertilizer attachments will need to be ordered through parts.
Granular fertilizer hopper lid - BA24230
Dry fertilizer attachment Dry fertilizer attachment

Hoppers hold approximately 550 lb of fertilizer for longer operating time between fill-ups.

 

Hopper lids provide large opening for fast filling with less spillage.

 

Hoppers pivot for easy dumping and cleaning.

 

Transmission (two on front-fold model) has 24 sprocket combinations in consistent 6 percent increments to allow applying fertilizer at the desired application rate.

 

Includes hoppers, transmissions, and drives. Requires augers and openers or surface application brackets.

NOTES:

  1. Warning and tail lamps recommended for planter since fertilizer attachment could obscure tractor tail and/or warning lights. 
  2. 1780 fertilizer placement on 30-in. row spacing only. 
  3. BA91309 can also be used on an 11-row planter; only six rows will fertilize. 6-row wide requires one A47389 coupler and one A47400 coupler from Parts.
  4. When adding to a planter with variable rate drive (VRD), additional drive components for the fertilizer attachments will need to be ordered through parts.
Granular fertilizer spouts for single-disk openers (2 rows) - BA25067
17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed 17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed
Double-disk opener assembly Double-disk opener assembly

Frame-mounted fertilizer openers are recommended for the following tillage conditions:

 

 

 Openers

Conventional 

Reduced 

 Moderate, no-till

 Moderate, double crop

 Single disk

 X

 X

 X

 X

 Double disk

 X

 X

 

 

 

Depending on the model, single-disk or double-disk frame-mounted fertilizer openers options are available to meet a wide range of operating conditions. The single-disk frame-mounted fertilizer opener is the most robust and versatile of the two frame-mounted options. 

 

There are two designs of frame-mounted single disk fertilizer openers available for planters today:

  • One design mounts to rigid frame or folding planters and utilizes a steel upper arm for secure mounting.  This style opener is shown in the right-hand picture above and has been available for a number of years.
  • The second design of frame-mounted single-disk openers is strictly for 17.8-cm x 17.8-cm (7-in. x 7-in.) frames and is for use on the 1775NT and 1795 Planters (excluding the 24Row20). This design incorporates a longer curved upper casting and is shown in the left-hand picture above.

Single-disk fertilizer openers feature a gauge wheel to:

  • Gauge fertilizer application depth
  • Minimize soil disruption

The frame-mounted, single-disk opener has the ability to be locked up in the raised position on 1795 Split-Row Planters. This eliminates excessive wear to the openers when planting soybeans with a 1795 and the openers are not utilized. There are two bundles required for updating 1795 Split-Row Planters. One bundle is used for the center frame section and the other bundle is for wing sections.

 

The frame-mounted, single-disk opener cannot be locked up in the raised position on 1775NT Planters due to frame tube and opener contact. The steel opener for rigid or folding planters (non-NT) can be raised somewhat by screwing up the spring assembly but cannot be completely raised from the soil.

 

NOTES:

  1. Single-disk openers on 8Row30 1755 frames are limited to placement of 7.6 cm to 15.2 cm (3 in. to 6 in.) off the row on rows 4 and 5.
  2. Single-disk opener is not recommended for loose, soft soil conditions unless equipped with cast spout.
  3. Single-disk opener has optional heavy-duty spring A50733 (Parts) if more down force is needed in tough no-till conditions.
  4. Double-disk opener is not compatible with frame-mounted coulter.

NOTE: Order number of opener bundles to match number of planter row units (i.e., 4Row 1755 Planter requires four BA91211 double-disk openers or two BA91212 single-disk openers).

Granular fertilizer spouts, cast - Special angled (2 rows) - BA25838
17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed 17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed
Double-disk opener assembly Double-disk opener assembly

Frame-mounted fertilizer openers are recommended for the following tillage conditions:

 

 

 Openers

Conventional 

Reduced 

 Moderate, no-till

 Moderate, double crop

 Single disk

 X

 X

 X

 X

 Double disk

 X

 X

 

 

 

Depending on the model, single-disk or double-disk frame-mounted fertilizer openers options are available to meet a wide range of operating conditions. The single-disk frame-mounted fertilizer opener is the most robust and versatile of the two frame-mounted options. 

 

There are two designs of frame-mounted single disk fertilizer openers available for planters today:

  • One design mounts to rigid frame or folding planters and utilizes a steel upper arm for secure mounting.  This style opener is shown in the right-hand picture above and has been available for a number of years.
  • The second design of frame-mounted single-disk openers is strictly for 17.8-cm x 17.8-cm (7-in. x 7-in.) frames and is for use on the 1775NT and 1795 Planters (excluding the 24Row20). This design incorporates a longer curved upper casting and is shown in the left-hand picture above.

Single-disk fertilizer openers feature a gauge wheel to:

  • Gauge fertilizer application depth
  • Minimize soil disruption

The frame-mounted, single-disk opener has the ability to be locked up in the raised position on 1795 Split-Row Planters. This eliminates excessive wear to the openers when planting soybeans with a 1795 and the openers are not utilized. There are two bundles required for updating 1795 Split-Row Planters. One bundle is used for the center frame section and the other bundle is for wing sections.

 

The frame-mounted, single-disk opener cannot be locked up in the raised position on 1775NT Planters due to frame tube and opener contact. The steel opener for rigid or folding planters (non-NT) can be raised somewhat by screwing up the spring assembly but cannot be completely raised from the soil.

 

NOTES:

  1. Single-disk openers on 8Row30 1755 frames are limited to placement of 7.6 cm to 15.2 cm (3 in. to 6 in.) off the row on rows 4 and 5.
  2. Single-disk opener is not recommended for loose, soft soil conditions unless equipped with cast spout.
  3. Single-disk opener has optional heavy-duty spring A50733 (Parts) if more down force is needed in tough no-till conditions.
  4. Double-disk opener is not compatible with frame-mounted coulter.

NOTE: Order number of opener bundles to match number of planter row units (i.e., 4Row 1755 Planter requires four BA91211 double-disk openers or two BA91212 single-disk openers).

Granular fertilizer spouts, cast for single-disk fertilizer openers (2 rows) - BH78916
17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed 17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed
Double-disk opener assembly Double-disk opener assembly

Frame-mounted fertilizer openers are recommended for the following tillage conditions:

 

 

 Openers

Conventional 

Reduced 

 Moderate, no-till

 Moderate, double crop

 Single disk

 X

 X

 X

 X

 Double disk

 X

 X

 

 

 

Depending on the model, single-disk or double-disk frame-mounted fertilizer openers options are available to meet a wide range of operating conditions. The single-disk frame-mounted fertilizer opener is the most robust and versatile of the two frame-mounted options. 

 

There are two designs of frame-mounted single disk fertilizer openers available for planters today:

  • One design mounts to rigid frame or folding planters and utilizes a steel upper arm for secure mounting.  This style opener is shown in the right-hand picture above and has been available for a number of years.
  • The second design of frame-mounted single-disk openers is strictly for 17.8-cm x 17.8-cm (7-in. x 7-in.) frames and is for use on the 1775NT and 1795 Planters (excluding the 24Row20). This design incorporates a longer curved upper casting and is shown in the left-hand picture above.

Single-disk fertilizer openers feature a gauge wheel to:

  • Gauge fertilizer application depth
  • Minimize soil disruption

The frame-mounted, single-disk opener has the ability to be locked up in the raised position on 1795 Split-Row Planters. This eliminates excessive wear to the openers when planting soybeans with a 1795 and the openers are not utilized. There are two bundles required for updating 1795 Split-Row Planters. One bundle is used for the center frame section and the other bundle is for wing sections.

 

The frame-mounted, single-disk opener cannot be locked up in the raised position on 1775NT Planters due to frame tube and opener contact. The steel opener for rigid or folding planters (non-NT) can be raised somewhat by screwing up the spring assembly but cannot be completely raised from the soil.

 

NOTES:

  1. Single-disk openers on 8Row30 1755 frames are limited to placement of 7.6 cm to 15.2 cm (3 in. to 6 in.) off the row on rows 4 and 5.
  2. Single-disk opener is not recommended for loose, soft soil conditions unless equipped with cast spout.
  3. Single-disk opener has optional heavy-duty spring A50733 (Parts) if more down force is needed in tough no-till conditions.
  4. Double-disk opener is not compatible with frame-mounted coulter.

NOTE: Order number of opener bundles to match number of planter row units (i.e., 4Row 1755 Planter requires four BA91211 double-disk openers or two BA91212 single-disk openers).

Herbicide and Insecticide with Rear-Mounted Herbicide Band Spreader and components - BA92513
Rear band spreader shown with windshield Rear band spreader shown with windshield

Includes granular insecticide (with components for seed furrow placement and front or rear band spreader capability) plus herbicide with rear-mounted spreader.

 

Insecticide can be placed ahead of closing wheels (in-furrow or banded) or behind closing wheels (banded).  Hopper, hopper divider, drive, and meters are included.

 

Windshield is available to decrease wind effect on distribution pattern (order separately).

Herbicide with Rear-Mounted Spreader with Slide Type Idler (1 Row) - BA92512
Rear-mount spreader Rear-mount spreader

In order to add dry chemical (herbicide) capability to planters equipped with MaxEmerge™ row units, the installation of the dry chemical hopper, meter, drive chains, rear-mounted spreader, and related attachment hardware are needed.

 

As seen fully assembled in the picture to the left, the herbicide spreader is equipped with a series of baffles that distribute the dry granules on the ground in a band approximately 14 in. wide. Along with the spreader assembly, a windshield is available to decrease the effect wind has on distribution pattern (order BA25340 separately).

NOTE: Not compatible with the seed packer wheel attachment or disk closing system.
Hopper - BA92511
Seed furrow placement Seed furrow placement
Band spreader placement Band spreader placement

Includes hopper, meter and both seed furrow placement and front band spreader components.

 

Granular chemical meters have a meter wheel for applications of up to 8 oz. per 1000 ft of row. For higher application rates, order the fluted roller for the meter (A50863) from Parts.

 

When seed furrow placement is used, insecticide is placed in seed furrow with the seed ahead of closing

wheel.

 

When band spreader is used, insecticide is placed on ground in a band approximately 7-in. wide ahead or behind closing wheels.

 

Available with regular or closed-chemical hopper lids.

NOTES:
1. Using rear-mount bracket (Code 9450/BA24528) allows using band spreader behind closing wheels.
2. Not compatible with seed packer wheel attachment or disk closing system.
3. Not compatible with 3.0 bushel seed hoppers.
Insecticide only to herbicide only conversion - Rear support and herbicide spreader (1 row) - BA27788
Rear-mount spreader Rear-mount spreader

In order to add dry chemical (herbicide) capability to planters equipped with MaxEmerge™ row units, the installation of the dry chemical hopper, meter, drive chains, rear-mounted spreader, and related attachment hardware are needed.

 

As seen fully assembled in the picture to the left, the herbicide spreader is equipped with a series of baffles that distribute the dry granules on the ground in a band approximately 14 in. wide. Along with the spreader assembly, a windshield is available to decrease the effect wind has on distribution pattern (order BA25340 separately).

NOTE: Not compatible with the seed packer wheel attachment or disk closing system.
Insecticide with Front Band Spreader or Seed Furrow Placement with Slide Type Idler (1 Row) - BA92510
Seed furrow placement Seed furrow placement
Band spreader placement Band spreader placement

Includes hopper, meter and both seed furrow placement and front band spreader components.

 

Granular chemical meters have a meter wheel for applications of up to 8 oz. per 1000 ft of row. For higher application rates, order the fluted roller for the meter (A50863) from Parts.

 

When seed furrow placement is used, insecticide is placed in seed furrow with the seed ahead of closing

wheel.

 

When band spreader is used, insecticide is placed on ground in a band approximately 7-in. wide ahead or behind closing wheels.

 

Available with regular or closed-chemical hopper lids.

NOTES:
1. Using rear-mount bracket (Code 9450/BA24528) allows using band spreader behind closing wheels.
2. Not compatible with seed packer wheel attachment or disk closing system.
3. Not compatible with 3.0 bushel seed hoppers.
Liquid Herbicide - Twelve Row - BA91350
Liquid herbicide pre-emerge spray attachment Liquid herbicide pre-emerge spray attachment

Applies pre-emerge liquid herbicide behind planting units.

Lower parts of attachment pivot rearward to prevent damage from obstructions such as corn stalks. Easy vertical adjustment permits quick setting of spray band width. Adapters are included to allow using flood tip nozzles for extended coverage. Approximate spray widths are:

  • ''Even'' type spray tips are recommended for spraying in bands from 7 to 17 in. with the nozzle in the lower position (shown).
  • The support tube may be inverted, placing the nozzle in the ''up'' position. Coverage in this position is from 50 to 90 in. in width when using flood type spray tips. This type of coverage is not recommended for less than 1/2 gallon per minute flow.

Check valves, nozzle bodies, and quick-attach nozzle caps are included for changing tips fast and easy without the use of tools. Also, this attachment for field conversion includes the distribution manifolds and hoses.

 

This attachment for field conversion does not include nozzle tips and strainers; see SprayMaster™ sprayer parts and accessories. Also, this attachment for field conversion does not include but requires (customer-supplied) tractor-mounted controls, tanks, pump and filters.

Liquid herbicide conversion distribution manifold for up to eight rows and hose connector to pump and control - BA25146

To adapt 1730 and 1780 Rigid Planters liquid herbicide attachment for 15- through 20-in. row spacing applications. Contains manifold for up to eight rows and hose connector to pump.

 

Does not include manifold distribution parts for 1/4-in. hose and spray nozzles. Does not include any hose pump or control. Order hose through Parts.

Liquid herbicide conversion pre-emerge spray brackets for MaxEmerge XP and Plus Planting Unit (1 Row) - BA25023

Used to attach pre-emerge spray nozzles behind the planting units. Includes nozzle body but does not include the hoses or nozzle tips.

 

To adapt 1730 and 1780 Rigid Planters liquid herbicide attachment for 15- through 20-in. row spacing applications.

Oil cooler - BH78741
PTO-driven hydraulic vacuum pump PTO-driven hydraulic vacuum pump

A PTO-driven hydraulic pump allows operators to use the vacuum seed meter system with open-center hydraulic tractors and/or a 540 rpm or 1000 rpm PTO.  The 540 rpm PTO system is compatible with 4Row through 9Row planters and provides 3.9 gpm at 80 percent of rated speed.  The 1000 rpm PTO system is compatible with 4Row through 15Row planters and provides 5.0 gpm at 80 percent of rated speed.  Both the 540 and 1000 rpm PTO pumps are for single vacuum motors only and inadequate for dual vacuum motors systems.

 

Flat seed disks such as edible bean and sweet corn require higher levels of vacuum.  These disks require a dual vacuum motor configuration on planters over 8 rows.  Neither the 540 or 1000 rpm PTO pump is adequate for flat seed disk operation.

 

9000 Codes include an oil cooler, except with 4-row planters with 540 rpm pump. When ordering PTO pump as a bundle, you must also order the oil cooler bundle, except with the 540 rpm PTO pump for 4-row applications.

Pneumatic down force assembly compressor with check valve - BA31836
Pneumatic downforce assembly Pneumatic downforce assembly

Improved pneumatic downforce systems are available as a factory-installed option on all planters and as a field conversion bundle for all MaxEmerge™ 5, MaxEmerge XP, MaxEmerge Plus, and MaxEmerge 2 planters. All pneumatic downforce field conversion bundles contain upgraded components to reflect pneumatic system upgrades for model year 2011.

 

Row-unit downforce is infinitely variable from 0 kg to 181.4 kg (0 lb to 400 lb). A gauge and/or display provides a reading as to how much downforce the system is providing. The downforce is constant at all times during operation.

 

On all model year 2011 and newer 1775NT, 1775NT Central Commodity System (CCS™), 1795, and DB Series Planters, the pneumatic downforce adjustment is displayed within the GreenStar™ 2 Display as base equipment. However, when converting a model year 2010 and older 1770NT, 1770NT CCS, 1790, and DB Series Planter, the air compressor assembly and gauge need to be mounted within the tractor cab, similar to factory-installed pneumatic downforce equipment configurations for that model year.

 

Each row-unit has a single air bag located between the parallel arms. The air bag is hooked in parallel so air can be added or released from all rows at once from one location. Split-row planters have the corn row-units and soybean rows plumbed separately, so the pressure can be removed from the bean rows when planting corn.

 

MaxEmerge 2 row-units with long parallel arms must have the arms changed to current production parallel arms. This ensures the correct hole pattern for pneumatic downforce. Refer to the attachment description to order the appropriate bundle for the frame size.

 

NOTE: Row-units with long parallel arms require A54544 spacer block if not so equipped (Service Parts).

In-cab compressor assembly In-cab compressor assembly

An air compressor, located either in the tractor cab or on the frame, pumps up the system. Integral planter models ordered with pneumatic downforce from the factory have in-cab mounting as base equipment. For drawn planter models, the air compressor assembly is mounted onto the planter frame for model year 2011. Prior to model year 2011, the 1775NT, 1775NT CCS, 1795, and DB Series Planters have the air compressor mounted within the tractor cab from the factory.

 

Valves located on the compressor allow bleed-off of the system. Interplant rows are shut off entirely when those rows are locked up.

 

Field conversion bundles have been established for upgrading pneumatic downforce systems. With the bundle structure, order the individual components for a pneumatic downforce system. There are individual bundles for the air compressor, the row-unit downforce assembly, and a hose kit.

 

Each planter requires one air-compressor bundle, a number of row-unit downforce assemblies equal to the number of rows on the planter, and a hose kit for each 12 rows being equipped with pneumatic downforce. There are four different row-unit downforce assembly attachments. The selection of the row-unit downforce assemblies is based on the type of meter drive (chain or Pro-Shaft™ drive) and type of parallel arms being utilized (regular or long) on the row-units.

Pneumatic down force assembly with long parallel arms (1 row) - BA31843
Pneumatic downforce assembly Pneumatic downforce assembly

Improved pneumatic downforce systems are available as a factory-installed option on all planters and as a field conversion bundle for all MaxEmerge™ 5, MaxEmerge XP, MaxEmerge Plus, and MaxEmerge 2 planters. All pneumatic downforce field conversion bundles contain upgraded components to reflect pneumatic system upgrades for model year 2011.

 

Row-unit downforce is infinitely variable from 0 kg to 181.4 kg (0 lb to 400 lb). A gauge and/or display provides a reading as to how much downforce the system is providing. The downforce is constant at all times during operation.

 

On all model year 2011 and newer 1775NT, 1775NT Central Commodity System (CCS™), 1795, and DB Series Planters, the pneumatic downforce adjustment is displayed within the GreenStar™ 2 Display as base equipment. However, when converting a model year 2010 and older 1770NT, 1770NT CCS, 1790, and DB Series Planter, the air compressor assembly and gauge need to be mounted within the tractor cab, similar to factory-installed pneumatic downforce equipment configurations for that model year.

 

Each row-unit has a single air bag located between the parallel arms. The air bag is hooked in parallel so air can be added or released from all rows at once from one location. Split-row planters have the corn row-units and soybean rows plumbed separately, so the pressure can be removed from the bean rows when planting corn.

 

MaxEmerge 2 row-units with long parallel arms must have the arms changed to current production parallel arms. This ensures the correct hole pattern for pneumatic downforce. Refer to the attachment description to order the appropriate bundle for the frame size.

 

NOTE: Row-units with long parallel arms require A54544 spacer block if not so equipped (Service Parts).

In-cab compressor assembly In-cab compressor assembly

An air compressor, located either in the tractor cab or on the frame, pumps up the system. Integral planter models ordered with pneumatic downforce from the factory have in-cab mounting as base equipment. For drawn planter models, the air compressor assembly is mounted onto the planter frame for model year 2011. Prior to model year 2011, the 1775NT, 1775NT CCS, 1795, and DB Series Planters have the air compressor mounted within the tractor cab from the factory.

 

Valves located on the compressor allow bleed-off of the system. Interplant rows are shut off entirely when those rows are locked up.

 

Field conversion bundles have been established for upgrading pneumatic downforce systems. With the bundle structure, order the individual components for a pneumatic downforce system. There are individual bundles for the air compressor, the row-unit downforce assembly, and a hose kit.

 

Each planter requires one air-compressor bundle, a number of row-unit downforce assemblies equal to the number of rows on the planter, and a hose kit for each 12 rows being equipped with pneumatic downforce. There are four different row-unit downforce assembly attachments. The selection of the row-unit downforce assemblies is based on the type of meter drive (chain or Pro-Shaft™ drive) and type of parallel arms being utilized (regular or long) on the row-units.

Pneumatic down force assembly with regular parallel arms (1 row) - BA31842
Pneumatic downforce assembly Pneumatic downforce assembly

Improved pneumatic downforce systems are available as a factory-installed option on all planters and as a field conversion bundle for all MaxEmerge™ 5, MaxEmerge XP, MaxEmerge Plus, and MaxEmerge 2 planters. All pneumatic downforce field conversion bundles contain upgraded components to reflect pneumatic system upgrades for model year 2011.

 

Row-unit downforce is infinitely variable from 0 kg to 181.4 kg (0 lb to 400 lb). A gauge and/or display provides a reading as to how much downforce the system is providing. The downforce is constant at all times during operation.

 

On all model year 2011 and newer 1775NT, 1775NT Central Commodity System (CCS™), 1795, and DB Series Planters, the pneumatic downforce adjustment is displayed within the GreenStar™ 2 Display as base equipment. However, when converting a model year 2010 and older 1770NT, 1770NT CCS, 1790, and DB Series Planter, the air compressor assembly and gauge need to be mounted within the tractor cab, similar to factory-installed pneumatic downforce equipment configurations for that model year.

 

Each row-unit has a single air bag located between the parallel arms. The air bag is hooked in parallel so air can be added or released from all rows at once from one location. Split-row planters have the corn row-units and soybean rows plumbed separately, so the pressure can be removed from the bean rows when planting corn.

 

MaxEmerge 2 row-units with long parallel arms must have the arms changed to current production parallel arms. This ensures the correct hole pattern for pneumatic downforce. Refer to the attachment description to order the appropriate bundle for the frame size.

 

NOTE: Row-units with long parallel arms require A54544 spacer block if not so equipped (Service Parts).

In-cab compressor assembly In-cab compressor assembly

An air compressor, located either in the tractor cab or on the frame, pumps up the system. Integral planter models ordered with pneumatic downforce from the factory have in-cab mounting as base equipment. For drawn planter models, the air compressor assembly is mounted onto the planter frame for model year 2011. Prior to model year 2011, the 1775NT, 1775NT CCS, 1795, and DB Series Planters have the air compressor mounted within the tractor cab from the factory.

 

Valves located on the compressor allow bleed-off of the system. Interplant rows are shut off entirely when those rows are locked up.

 

Field conversion bundles have been established for upgrading pneumatic downforce systems. With the bundle structure, order the individual components for a pneumatic downforce system. There are individual bundles for the air compressor, the row-unit downforce assembly, and a hose kit.

 

Each planter requires one air-compressor bundle, a number of row-unit downforce assemblies equal to the number of rows on the planter, and a hose kit for each 12 rows being equipped with pneumatic downforce. There are four different row-unit downforce assembly attachments. The selection of the row-unit downforce assemblies is based on the type of meter drive (chain or Pro-Shaft™ drive) and type of parallel arms being utilized (regular or long) on the row-units.

Pneumatic down force hose kit - 22.86 m (75 ft) of hose - BA31839
Pneumatic downforce assembly Pneumatic downforce assembly

Improved pneumatic downforce systems are available as a factory-installed option on all planters and as a field conversion bundle for all MaxEmerge™ 5, MaxEmerge XP, MaxEmerge Plus, and MaxEmerge 2 planters. All pneumatic downforce field conversion bundles contain upgraded components to reflect pneumatic system upgrades for model year 2011.

 

Row-unit downforce is infinitely variable from 0 kg to 181.4 kg (0 lb to 400 lb). A gauge and/or display provides a reading as to how much downforce the system is providing. The downforce is constant at all times during operation.

 

On all model year 2011 and newer 1775NT, 1775NT Central Commodity System (CCS™), 1795, and DB Series Planters, the pneumatic downforce adjustment is displayed within the GreenStar™ 2 Display as base equipment. However, when converting a model year 2010 and older 1770NT, 1770NT CCS, 1790, and DB Series Planter, the air compressor assembly and gauge need to be mounted within the tractor cab, similar to factory-installed pneumatic downforce equipment configurations for that model year.

 

Each row-unit has a single air bag located between the parallel arms. The air bag is hooked in parallel so air can be added or released from all rows at once from one location. Split-row planters have the corn row-units and soybean rows plumbed separately, so the pressure can be removed from the bean rows when planting corn.

 

MaxEmerge 2 row-units with long parallel arms must have the arms changed to current production parallel arms. This ensures the correct hole pattern for pneumatic downforce. Refer to the attachment description to order the appropriate bundle for the frame size.

 

NOTE: Row-units with long parallel arms require A54544 spacer block if not so equipped (Service Parts).

In-cab compressor assembly In-cab compressor assembly

An air compressor, located either in the tractor cab or on the frame, pumps up the system. Integral planter models ordered with pneumatic downforce from the factory have in-cab mounting as base equipment. For drawn planter models, the air compressor assembly is mounted onto the planter frame for model year 2011. Prior to model year 2011, the 1775NT, 1775NT CCS, 1795, and DB Series Planters have the air compressor mounted within the tractor cab from the factory.

 

Valves located on the compressor allow bleed-off of the system. Interplant rows are shut off entirely when those rows are locked up.

 

Field conversion bundles have been established for upgrading pneumatic downforce systems. With the bundle structure, order the individual components for a pneumatic downforce system. There are individual bundles for the air compressor, the row-unit downforce assembly, and a hose kit.

 

Each planter requires one air-compressor bundle, a number of row-unit downforce assemblies equal to the number of rows on the planter, and a hose kit for each 12 rows being equipped with pneumatic downforce. There are four different row-unit downforce assembly attachments. The selection of the row-unit downforce assemblies is based on the type of meter drive (chain or Pro-Shaft™ drive) and type of parallel arms being utilized (regular or long) on the row-units.

Radar for planter monitor system - BA31915
Mounting bracket and adapter harness Mounting bracket and adapter harness

The planter radar is for SeedStarTM and ComputerTrakTM systems. The SeedStar and ComputerTrak 250, 350, and 450 monitor systems require radar.

Radial bean seed meters for MaxEmerge XP row units (3 rows) - BA27748
Radial bean meter Radial bean meter

The radial bean meter is a mechanical meter to be used in conjunction with the finger pickup meter. Soybeans are the only crop compatible with the radial meter.

 

Those who are currently using the feed cup or competitive brush meters for soybeans and who desire improved spacing and population control should consider the radial meter.

 

A seed bowl mounts to the meter housing and rotates around the meter housing, singulating seeds for enhanced spacing.

 

The seed bowl clearance is adjusted in relationship to the meter housing as seed size is changed. Seeds, ranging from 2000 seeds per lb to 4500 seeds per lb, are planted with the one seed bowl.

 

Brushes mounted on the meter housing act as doubles eliminators and cleaners for the seed bowl.

 

Meter utilizes a sprocket-type wheel to better eliminate any beans being stuck in the seed bowl and to offer greater wear characteristics.

 

Meter component life is at least 650 acres per row, prior to wear appearing, for minimum maintenance.

 

NOTES:

  1. Radial bean meters require A58634 clip from Service Parts to install meters on 1997
    and earlier 3-bu fiberglass hoppers
  2. The radial bean meter is also available for MaxEmerge™ planters by ordering  AA45061  from Parts.
Radial bean seed meters for MaxEmerge XP row units (4 rows) - BA27747
Radial bean meter Radial bean meter

The radial bean meter is a mechanical meter to be used in conjunction with the finger pickup meter. Soybeans are the only crop compatible with the radial meter.

 

Those who are currently using the feed cup or competitive brush meters for soybeans and who desire improved spacing and population control should consider the radial meter.

 

A seed bowl mounts to the meter housing and rotates around the meter housing, singulating seeds for enhanced spacing.

 

The seed bowl clearance is adjusted in relationship to the meter housing as seed size is changed. Seeds, ranging from 2000 seeds per lb to 4500 seeds per lb, are planted with the one seed bowl.

 

Brushes mounted on the meter housing act as doubles eliminators and cleaners for the seed bowl.

 

Meter utilizes a sprocket-type wheel to better eliminate any beans being stuck in the seed bowl and to offer greater wear characteristics.

 

Meter component life is at least 650 acres per row, prior to wear appearing, for minimum maintenance.

 

NOTES:

  1. Radial bean meters require A58634 clip from Service Parts to install meters on 1997
    and earlier 3-bu fiberglass hoppers
  2. The radial bean meter is also available for MaxEmerge™ planters by ordering  AA45061  from Parts.
Row Tillage Support Bracket for Tine Tooth Tillage, Conservation Disk Furrowers and V-Wing Bed Sweep (1 Row) - BA32862
Row tillage support bracket Row tillage support bracket

Includes pointer, scale, and large easy-to-use adjustment knob for convenient adjustment to desired working depth.

Required with tine tooth tillage, conservation furrower, and V-wing attachments when ordered as extra equipment.

 

NOTES:  

1) Not compatible with unit- or frame-mounted coulters or heavy-duty parallel arms. 

2) For MaxEmerge™ 2  planters built prior to June 1991, order A52092 cast lower parallel arm.

Scrapers - Heavy duty for Tru-Vee opener blades (2 rows) - BA28012
Heavy-duty scrapers Heavy-duty scrapers

Recommended for extremely sticky soils where even rotary scrapers have problems keeping Tru-VeeTM  disks clean.

Scraper blades are heat treated for added wear.

NOTE:  Not compatible with any row-unit tillage attachments except conservation furrowers, unit-mounted coulter, and unit-mounted row cleaner.
Screw adjust unit mounted row cleaner (1 row) - BA32571
Screw-adjust, unit-mounted row cleaner Screw-adjust, unit-mounted row cleaner
SharkTooth® wheel SharkTooth® wheel

The screw-adjust, unit-mounted row cleaner is mounted directly to the face plate of the row-unit, placing the ground-engaging components just in front of the row-unit opener blades and depth gauge wheels. This close proximity allows the gauge wheels to control the depth of the row cleaner as well as the row-unit. This compact design also allows greater compatibility with fertilizer openers and other planter attachments.

Features

The unit-mounted row cleaner features the SharkTooth® wheel. The beveled, sharpened edge of the teeth on the SharkTooth aggressively cut tough residue that lies in the path of the row-unit. The curved-tooth design sweeps a clear path for the openers and resists residue buildup. The wheels are arranged in a staggered fashion with one wheel leading the other, ensuring complete clearing of the row-unit path. The bearing on the SharkTooth wheel is sealed and requires no regular maintenance. Bearing shields are used between the wheel and the mount bracket to prevent residue wrapping and buildup around the bearing housing.
 

Adjustability

The unit-mounted row cleaner offers a convenient screw adjustment feature for changing the depth setting. The acme screw is enclosed within the structure of the mounting bracket, providing protection from the elements. The adjustment knob for the screw adjustment is accessible from the top of the parallel arms. The knob can be adjusted by hand or by using a socket. The adjustment is detented in 1.6-mm (1/16-in.) increments, allowing for quick, easily repeatable adjustments across all rows of the planter. An indicator rod and scale on the front of the row cleaner bracket indicate the current setting. If a condition is encountered where use of the row cleaner is not desired, it can be set so that the wheels do not engage the soil surface.

Operational notes and compatibility

Use of row cleaners is not recommended when surface application pre-plant herbicide is used prior to planting. When using pre-plant incorporated herbicide, the row cleaner should be adjusted to minimize soil disturbance so as not to reduce the effectiveness of the incorporated herbicide.

 

Drive chain shields are recommended for use with row cleaner attachments.

 

NOTES:

  • Not compatible with use of frame-mounted coulter.
  • Not compatible with any row spacing less than 76.2 cm (30 in.).
  • For 1790 12/23, 12/24, 16/31, and 16/32 row machines, unit-mounted row cleaners recommended provided on the front rank of row units only.
  • For DB60 47R15 machines, unit-mounted row cleaners are recommended on the 24 row units with short parallel arms only.
  • Other row cleaner designs are available for compatibility with unit-mounted coulters and row unit-mounted double-disk fertilizer openers.
  • Bundle is not compatible with long parallel arms. If purchasing for use on a long parallel arm machine, a separate bracket must be ordered from Service Parts.
  • Drive wheel chain shields are not required on 1760, 1770 12Row30 (non-NT), or 1780 Front-Fold Planters.
  • Drive wheel chain shields are required on other compatible models. Order BA25697 for the 1750 Standard Planter. Order BA24093 for all planters except the 1750 Standard.

SharkTooth is a trademark of Yetter Manufacturing, Inc.

Seed hopper and lid - Plateless 1.6 bushel (1 row) - BA28955
Plastic 3.0 bushel hopper and lid Plastic 3.0 bushel hopper and lid

Attachments for field conversion are available for complete seed hoppers and lids. Includes plateless and vacuum plastic 1.6 or 3.0 bushel seed hopper and lid. Seed meter, drive, and latch must be ordered separately if needed. These are for MaxEmerge™ XP rows only.

Seed packer press wheel attachment (1 row) - BA24575
Seed packer wheel Seed packer wheel

For use when planting cotton in special growing conditions found primarily in southwestern United States.

 

Some particularly difficult soil types found in these areas are susceptible to severe ''baking and crusting'' if sufficient wind, soil moisture, temperature and sunlight conditions are present. In these situations, it is important to achieve adequate seed/soil contact while minimizing soil surface compaction.

 

Includes a wheel that runs ahead of the closing wheels to press the cotton seed into the bottom of the furrow.

 

Using the packer wheel enables the regular closing wheels to be used with a minimum force setting.

 

 

 

 

 

Wheels should not be used in the following conditions:

  • Moist soil conditions.
  • Contour planting application.
  • Reduced tillage conditions (typical corn-belt conditions).

Not compatible with:

  • Front band insecticide spreader.
  • Rear-mounted herbicide/insecticide attachments.
  • Disk closing.
Unit mounted coulter - Less coulter blade (1 row) - BA30078
Unit-mounted coulter (shown with fluted blade) Unit-mounted coulter (shown with fluted blade)

Adapts planter to plant in reduced tillage conditions.

 

Nodular iron coulter arm mounts directly to planting unit shank to utilize full unit weight for penetration.

 

Unit gauge wheels provide depth control.

 

Coulter blade is positioned directly ahead of Tru-Vee™ opener to ensure accurate tillage in seed zone.

 

Rippled or fluted blades are available to suit a wide range of tillage and soil conditions.

NOTES:

1) Not compatible with tine tooth tillage, furrower attachments, V-wing bed sweep frame-mounted coulter or unit-mounted row cleaner.

2) Ballast attachment (or fertilizer attachment) may be required for penetration.

3) BA28970 or BA28971, heavy-duty adjustable downforce springs or pneumatic downforce system, are required to provide increased coulter penetration in hard soils and also to help keep unit from bouncing when being operated on rough seedbeds. (Not included with BA30078).

4) Requires A52092 cast heavy-duty lower regular parallel arm (one row) or A84382 heavy-duty lower long parallel arm (one row) from Service Parts. Heavy-duty long parallel arm is designed for use only with the unit-mounted coulter (not for tillage tool support bracket). Cast lower parallel arms have been standard equipment for a number of years, confirm what lower parallel arm subject planter is equipped with.

Vacuum level sensor - SeedStar - BA26722
Fertilizer pressure sensor for SeedStar Fertilizer pressure sensor for SeedStar
Vacuum pump power take-off (PTO) driven hydraulic system - 1000 rpm, hoses and fittings - BH78873
PTO-driven hydraulic vacuum pump PTO-driven hydraulic vacuum pump

A PTO-driven hydraulic pump allows operators to use the vacuum seed meter system with open-center hydraulic tractors and/or a 540 rpm or 1000 rpm PTO.  The 540 rpm PTO system is compatible with 4Row through 9Row planters and provides 3.9 gpm at 80 percent of rated speed.  The 1000 rpm PTO system is compatible with 4Row through 15Row planters and provides 5.0 gpm at 80 percent of rated speed.  Both the 540 and 1000 rpm PTO pumps are for single vacuum motors only and inadequate for dual vacuum motors systems.

 

Flat seed disks such as edible bean and sweet corn require higher levels of vacuum.  These disks require a dual vacuum motor configuration on planters over 8 rows.  Neither the 540 or 1000 rpm PTO pump is adequate for flat seed disk operation.

 

9000 Codes include an oil cooler, except with 4-row planters with 540 rpm pump. When ordering PTO pump as a bundle, you must also order the oil cooler bundle, except with the 540 rpm PTO pump for 4-row applications.

Wheel cover - BA26504
Wheel cover Wheel cover

The covers for the tire rim used on the wheel module prevents rocks and other objects from becoming lodged between the rim/tire and the wheel module frame member. Lodged objects in this area could stop the wheel from rotating or tear out the tire valve stem, causing a flat tire. A U-shaped cutout in the wheel cover allows the tire pressure to be checked without removing the cover.

 

The wheel cover is not compatible with the SeedStar™ variable-rate-drive option. The wheel that has the motion sensor for the SeedStar variable-rate drive cannot be covered.

NOTE: Wheel covers are also available as service parts. For 1760 or 1770 12Row30 Planter.

Videos