Additionally, paste this code immediately after the opening  tag:
Quick Used Equipment Filter

used search tag
Total: $0.00
    Nothing In Your Cart...
Go to Cart


Self-Propelled Forage Harvester

  • 616 hp John Deere PowerTech™ PSX engine
  • Driveline designed to deliver optimal crop flow when the engine is operating in its efficiency sweet spot
  • The ProStream crop flow designed with extra heavy-duty components for high horsepower and more throughput than ever before

View Product Brochure


Leading header technology

John Deere rotary harvesting units are built for reliable and powerful feeding of high-capacity forage harvesters. Two fundamental designs are available to match all producer needs. The 600plus Series Headers are the universal solution for different crops up to 4-m (13.1-ft) tall. The 700plus Series Headers are the perfect solution for high-yielding crops.

772 Rotary Harvesting Unit772 Rotary Harvesting Unit

Available beginning in model year 2019, the top-model 772 12-Row Large-Drum Rotary Harvesting Unit has been designed to fully leverage the capacity of 9000 Series Self-Propelled Forage Harvesters (SPFH).

6X9 Series Windrow Pickup6X9 Series Windrow Pickup

The 6X9 Series Pickups with the patented endless flight vortex auger design and optional dual header drive enable high-capacity feeding of John Deere SPFH. Key advantages are the throughput boost in high-yielding crops but also the easy handling of uneven windrows.

Variable header drive
Power distribution gearbox (A), header pump (B), and header motor (C)Power distribution gearbox (A), header pump (B), and header motor (C)

John Deere SPFH come with variable header drive in base. The header speed is automatically synchronized with the feeding speed and length of chop through a hydrostatic IVT™ drive system. This ensures a gentle and even crop transfer from the header into the machine without blocking or disrupting material transition. Producers receive the benefit of high chopping quality and full leverage of the header and crop flow potential.

Dual header drive

Dual header drive for the SPFH and the 6X9 Series Pickups complements the benefits of the variable header drive. While the variable header drive automatically synchronizes the pickup auger and harvester feeding speed, the dual header drive with its individual hydraulic drive of the pickup tines is speed matched with vehicle speed to ensure clean crop picking in changing conditions and windows.

Speed synchronization between the SPFH and headerSpeed synchronization between the SPFH and header

Tines speed up and slow down with forward speed while the pickup auger speed is still synchronized with the length of chop and feedroll speed. Producers benefit from a better quality of chop, smoother feeding, and an easy-to-utilize harvesting system.

Hydraulic feedroll dampening

The 9000 Series SPFH offer the hydraulic feedroll dampener in base. Next to the four individual springs applying high pressure on the crop mat entering the machine, the dampener supports crop compaction in uneven crop conditions and ensures smooth feeding even at the highest feeding speeds when chopping for a very long period.

Hydraulic feedroll dampeningHydraulic feedroll dampening
Crop compaction and even feeding at the feedrollCrop compaction and even feeding at the feedroll
Unique foreign object protection

A state-of-the-art metal detector scans for metal in the crop mat and stops the intake in case of tripping. Optionally, this safety device can be completed with a unique stone detection feature that senses for knocks and abnormal feedroll movement. Two redundant sensors developed for this application improve solid foreign object detection and minimize false tripping caused by lumps or uneven windrows.

John Deere Premium KP™John Deere Premium KP™
John Deere XStream KP™John Deere XStream KP™

All 9000 Series Self-Propelled Forage Harvesters (SPFH) can be operated with or without a kernel processing unit in position. When not in use, a crop transition chute swings into position at a few turns of a crank. The crop transition chute comes standard on all harvesters.


Also available on all SPFH is the optional dismounting crane for easy kernel processing swing outside the service compartment.


The 9000 Series SPFH feature the AutoLube central greasing harness; the respective central greasing equipment is available on the Premium Kernel Processor as well. The XStream Kernel Processor features an automatic pressurized oil lubrication.


For the 9000 Series, two types of kernel processors (KP) are offered: the John Deere Premium KP and the John Deere XStream KP. Both kernel processors have been tested and proven by independent experts during corn harvest in 2016 and 2017.


The 9600, 9700, and 9800 SPFH can be equipped with the John Deere XStream KP or the John Deere Premium KP. For the 9900, only the heavy-duty XStream KP solution is available.

John Deere Premium KP

On the 9000 Series, the proven John Deere Premium KP can be installed on the 9600, 9700, and 9800 models. With their highly intense processing, they deliver the best results at any length of cut.


The Premium KP has a standard KP housing with grease lubrication in base. The roll diameter is 240 mm (9.45 in.) with 32 percent speed differential. As an option, 40 percent speed differential can be installed, if required.


The following rolls are available for the Premium KP:

  • Dura Line™ sawtooth
  • Whole crop
  • Milo

With Dura Line rolls, a longer lifetime and less wear can be reached, resulting in less cost of operation.


For an easy and uncomplicated mounting and dismounting of the Kernel Processor, a crane with electric winch can be installed as an option.

John Deere XStream KP

The John Deere XStream KP is made for high-horsepower machines and stands for extreme kernel processing at any length of cut.


The XStream KP rolls are manufactured and delivered by Scherer Inc., which is located in South Dakota, Unites States. The kernel processor fits all 9000 Series models (9600 through 9900). As Scherer Inc. has a strong focus on dairy forage production and is the leading company in KP roll designs and manufacturing since 1999, a strong statement is set in regards to kernel processing and forage quality.


More information about Scherer Inc. can be found on their website:


The XStream KP is equipped with a heavy-duty housing with KP roll quick-exchange system and pressurized oil lubrication. The roll diameter is 250 mm (9.8 in.) with 50 percent speed differential. As an option, the XStream KP can be equipped with bearing temperature monitoring.


The following rolls are available for the XStream KP:

  • Dura Line sawtooth
  • Dura Line XCut rolls
  • Whole crop XCut rolls

In comparison to the Dura Line sawtooth rolls, the Dura Line XCut rolls have a spiral groove sawtooth profile, delivering excellent processing, especially at long lengths of cut. The spiral groove design delivers highly processed plants and smashed kernels.




Low cost of operation and longer lifetime

Due to a special heat treatment, the coating is extremely wear resistant and has an extraordinarily smooth surface. This results in a permanent fast chopping process while the fuel consumption remains low.


Tests show that while chopping in the same crop conditions and chopping the same tonnage, Dura Line parts last four times as long as, or longer than, standard parts. Time and money associated with replacing parts are significantly reduced.

Benefits of Dura Line parts
  • Performance – an extremely hard coating makes Dura Line wear parts the toughest. Dura Line is exclusively supplied from John Deere.
  • Uptime – Dura Line uses a unique technology that provides more hours of extensive machine use before parts need to be replaced. A proprietary tungsten carbide composition associated with unique application provides this exclusive wear-resistance performance.
  • Cost of operation – premium John Deere parts last up to five times longer and cut labor costs. This significantly minimizes the risk of downtime during the harvesting season, saving money in the long run.
Dura Line packages

Dura Line parts cover nearly every wear part that does not already have a high-wear solution. The main crop flow elements are hardened and more resistant, even in the toughest conditions. Dura Line parts include spiral band, knife brackets, front chute, grass channel blower band, blower side liners, spout liners, and spout caps.


Three packages are available to match different producer requirements:

Producers have the ability to equip their 8000 or 9000 Series Self-Propelled Forage Harvesters (SPFH) with Dura Line components for extended part lifetime and lower cost of operation.

Three packages are available to match different producer requirements:

#Dura Line™ ComponentBasicPremiumUltimate
1Spiral band (cutterhead floor)
2Accelerator band
3Spout flap
4Spout wear liners 
5Front chute base liner 
6Grass chute base liner  
7Accelerator side wall liners  
8Front chute side liners  
9Smooth roll scraper  
10Dura Line knife holders  
11Transition front liners (Model year 2019)  
12 Dura Line Plus Shearbar   √


Dura Line spout and wear partsDura Line spout and wear parts
Option codeDescription
2720Standard wear machine
2721Dura Line Basic
2722Dura Line Premium
2723Dura Line Ultimate
HarvestLab measures dry matter on the goHarvestLab measures dry matter on the go
Dry matter sensor mounts on the spoutDry matter sensor mounts on the spout

The HarvestLab sensor mounts to the top of the discharge spout and takes accurate dry matter and ingredient readings (more than 4000 measurements per second) of the crop through the sapphire glass lens as crop passes through the spout. This is the same technology forage labs use to measure dry matter. HarvestLab with John Deere Constituents Sensing measures dry matter, and has the ability to measure sugar, starch, acid detergent fiber (ADF), neutral detergent fiber (NDF), and crude protein in corn silage as well as ensiled material when used as a stationary unit.


When HarvestLab is used in conjunction with Harvest Monitor™, a wealth of important information becomes available to the operator, including productivity in acres per hour, throughput in tons per hour, total area harvested, total crop mass harvested, yields, and dry matter.


When the HarvestLab is used in conjunction with an 8000 or 9000 Series Self-Propelled Forage Harvester (SPFH) and a GreenStar™ display, AutoLoc™ functionality is automatically present. AutoLoc automatically varies the length of cut according to the desired crop-dry matter correlation settings based on the dry matter readings from the HarvestLab sensor.

Crop type and constituent sensing (R4)
CropMaterialDry MatterADF*NDF**StarchProteinSugarCrude Fibre (XF)Crude Ash (XA)
Corn silageFreshly harvested and ensiledYesYesYesYesYesNoNoNo
Whole crop silageYesYesYesYesYesNoNoNo

*ADF - Acid Detergent Fibre

**NDF - Neutral Density Fibre


Key Specs 9600-forage-harvester
Current Model
Maximum power at 1800 rpm460 kW
625 PS / 616 hp
PowerTech™ PSS 13.5L
Exhaust emission regulation compliancy - Final Tier 4 / Stage V
13.5 L
823.8 cu in.
Europe: 6135HZ021
North America: 6135HZ022
Inline 6
Fuel systemUnit injectors plus four valves
Fuel tank capacity1,100 L
290.6 U.S. gal.
DEF tank capacity ( for FT4 or EU Stage V emission level)43 L
11.4 U.S. gal.
Hand wash tank capacity
Engine power
Maximum power at 1800 rpm460 kW
625 PS / 616 hp
Maximum power at 1900 rpm
Rated power at 2100 rpm428 kW
582 PS / 574 hp
Fuel tank capacity1100 L
290.6 U.S. gal.
DEF tank capacity ( for FT4 or EU Stage V emission level)43 L
11.4 U.S. gal.
ManufacturerJohn Deere
TypePowerTech™ PSS 13.5L
Exhaust emission regulation compliancy - Final Tier 4 / Stage V
ModelEurope: 6135HZ021
North America: 6135HZ022
Displacement13.5 L
823.8 cu in.
CylindersIn line 6
Speed on road
Fuel systemUnit injectors plus four valves
Engine/ground speed management
Cooling system
Cooling system capacity113 L
29.85 U.S. gal.
Cooling fan driveDirect
Ground driveProdrive, autoshift transmission, differential lock (automatic and manual), automatic wet brake system
Engine rpm on road: 1400-2100 rpm
HydraulicsLoad sensing
Crop harvesting unitHarvest channel wide
Crop flow componentsLow-friction crop-flow concept
Main clutchDry clutch
Number of discsOne disc
Main drivebandReinforced with Kevlar inserts
Belt tensioningActive, hydraulic pressure
Main driveband, polybelt beltsSix ribs
Header drive
Electrical system/Electrical and hydraulic system
Type/voltage12 V
Batteries/battery quantity/capacity2 x 174 amp-hr
Alternator200 amp
Hydraulic system capacity50 L
13.2 U.S. gal.
Ground drive
TypeProdrive, autoshift transmission, differential lock (automatic and manual), automatic wet brake system
Engine rpm on road: 1400-2100 rpm
Differential lockManual and automatic
Maximum transport speedHydrostatic transmission: 25 / 30 km/h
15.5 / 18.6 mph
ProDrive transmission: 20 / 25 / 30 / 40 km/h
12.4 / 15.5 / 18.6 / 24.9 mph
Rear axle typeHydro-mechanical 4WD
Automatic wet brake systemAvailable with ProDrive transmission
Engine rpm - ManagementStandard
Tilt and extend steering columnStandard
Air conditioning and heaterStandard - ClimaTrak
Cool boxOptional
Trainee seatStandard
Hectare counterStandard
Operator information systemCornerpost display
CAN-BUS electronicsStandard
Operator's seatAir-suspension seat optional
Side window wiperRear and side window wiper optional
Parallel-type windscreen wiper
Electric adjust and heatedOptional on rear view mirrors
Rear view mirrorsStandard
Hand wash tank capacity
Machine management solutions
Yield monitoringHarvest Monitor™ optional
DocumentationHarvest Doc™ optional
Crop analysisHarvestLab™ optional
Length-of-cut control based on crop parameterInfinitely variable length-of-cut (IVLOC™) standard
AutoLOC™ optional - use with HarvestLab
Satellite (GPS) assisted steeringAutoTrac™ optional
Crop-harvesting units
Header height controlAdvanced header control (AHC) optional
Grass pick-ups (transport width)3.0, 4.0, 4.5 m
9.8, 13.1, 14.8 ft
Maize or corn headers
Header connection
Harvest channel
Length of cut
Feeding system/Feedrolls
Feed roll frame openingSwing away, 37-45 degree (angle)
Metal detectorStandard
Stone detector is optional
Width, front830 mm
32.7 in.
Standard feed roll driveHydro feedroll drive IVLOC standard
Infinitely header drive speed standard
Optional feed roll driveHydro feedroll drive IVLOC
TypeDura-Drum™ cutterhead
Cutterhead housing width
Knife drum width850 mm
33.5 in.
Knife drum diameter670 mm
26.4 in.
Speed at rated engine speedStandard - 1100 rpm
Optional - 1200 rpm
Knife types available (crop)Straight - grass
Curved - corn
Number of knives
Shear bar, reversible
Shear bar adjust
Knife sharpening system
Reverse rotationYes
Automatic from cabYes, remote from cab
Reverse driveStandard
Reverse speed
Sharpening modes
Kernel processor
TypeJohn Deere Premium KP, John Deere XStream KP
Quick-changeQuick kernel processor - swing in/swing out
Quick KP removalOptional crane with remote-controlled electric hoist
John Deere Premium KP
Roll diameter240 mm
9.45 in.
Speed differential / Roll speed (lower)
Maize, roll teeth number (speed differential)118 (32 or 40 percent)
Wholecrop, roll teeth number (speed differential)178 (32 or 40 percent)
Sorghum, roll teeth number (speed differential)238 (32 percent)
Weight163.3 kg
360 lb
Available KP rolls
John Deere XStream KP
Roll diameter250 mm
9.8 in.
Speed differential / Roll speed (lower)
Bearing temperature monitoring system
Maize, roll teeth number (speed differential)110/145 (50 percent)
Wholecrop, roll teeth number (speed differential)145/165 (50 percent)
Sorghum, roll teeth number (speed differential)238 (32 percent)
Available KP rolls
Serrated roller (kernel processor)
Maize, roll teeth number (speed differential)
Wholecrop, roll teeth number (speed differential)
Sorghum, roll teeth number (speed differential)
Disk type (kernel processor)
Number of disks (top/bottom)
Diameter of disks
Blower/Crop accelerator
Rotor diameter/housing width560 / 620 mm
22.86 / 24.41 in.
Number of blades10
Speed (option)1800 rpm
Rotation, degrees210 degree (angle)
Hydraulic height positionHydraulic raise and lower standard
Automatic spout positioning optional
Double-cap deflectionStandard
Number of wear liners
Reach from center line (Optional)6 or 8 row: 4.73 m
15.5 ft
10 row: 5.87 m
19.3 ft
12 row: 6.71 m
22 ft
Rotary radiator screen cleanerStandard
Automatic lubrication systemAutoLube optional
Engine oil and filter change durationJD+50™ II oil: 350 hours
Other oil: 250 hours
With front tires710/70R42
With rear tires620/60R30
Transport length (without header)6.6 m
21.7 ft
Transport width (without header)3.1-3.7 m
10.2-12.1 ft
Transport height (to cab roof)3.89 m
12.75 ft
Working height (maximum)Height to spout: 6.60 m
21.65 ft
Approximate weight (without header)
Propelling drive

Need Help?

call icon

Call us


locations icon