John Deere AF10F

Metal cutting edge

Optional urethane cutting edge

The reversible cutting edge on the AF10F Front Blade enhances performance and extends working life.

Springs for trip-edge protection

The trip edge protects the blade, loader, and tractor if the edge of the blade contacts an obstacle.

Pin-and-hole blade angle adjustment

An operator can manually adjust the angle of the blade, choosing from five adjustments for a total 30-degree rotation.

Retaining pins of quick-change attachment carrier

No tools are required to attach the front blade. To connect, align the attachment carrier with the hooks of the front blade, raise the boom for the carrier to engage the hooks of the blade, and roll back the attachment carrier. Then install the retaining pins, and the carrier is ready to work.

Base skid shoe kit

Optional urethane skid shoe kit

Skid shoes increase the life of the cutting edge while avoiding damage to the working surface.

Rubber deflector kit sits on top of the blade

The rubber deflector kit decreases snow buildup on the grill screen during snow removal.

Plow guide kit

The plow guide kit helps prevent curb and wall strikes by providing a visual of the blade’s edge.

Optional urethane cutting edge

Urethane, a more solid material than rubber, provides a better cutting edge for snow removal by preventing damage to textured surfaces.

Optional urethane skid shoe kit

The urethane skid shoe kit prevents damage to textured surfaces, while prolonging the life of the cutting edge.

Optional hydraulic angle kit

The hydraulic angle kit is an optional field-installed attachment for the AF10F Front Blade that allows angling the front blade up to 30 degrees or any position between, right or left of center.

It requires third-function hydraulics (see loader options for third-function kit information).

It is compatible with AF10F serial number 1XFAF10FPJ002201 and higher.