John Deere Z545R
ZTrak™ Mower with 60-in. Deck
- 25 hp* (18.6 kW) EFI engine with Electronic Throttle Control
- 60-in (152 cm) High Capacity mower deck
- 22.5-in seat with armrests and ComfortGlide™ suspension
- Folding Rollover Protective Structure (ROPS)
- Rubber floor mats, toe board mat, foot lift, premium control levers, LED lights, and rear hitch come standard
- 4-year/500-hour bumper-to-bumper warranty
Features
The operator station is designed to provide superior operator comfort for many different operators:
- Large, comfortable foot platform
- Plenty of legroom for comfortable operation
- Isolated with thick rubber spacers to minimize vibration
- Standard rubber floor mat for extra foot comfort
- Standard rubber toe board mat to stretch your legs in comfort
- Standard foot pegs allow various comfortable positions for your feet
- Adjustable seat position, armrests, and spring suspension to suit each operator
- Control panel conveniently located to the right of the seat
- Adjustable premium motion-control levers
- Premium motion control levers have extra bends and material for greater operator comfort
- Upper and lower positioning combined with forward and rearward tilt offers more legroom and hand positions
Comfortable seat
The comfortable seat has two suspension springs, fore-aft seat adjustment and ComfortGlide suspension:
- A high-back, 22.5-in. (57.1-cm) seat with thick foam padding for good support and comfort
- Armrests for extra support
- 3-in. (7.6-cm) no-tools, fore-aft adjustment
Seat suspension
- Two long, steel springs to absorb shocks when traveling over rougher areas
- ComfortGlide is an additional system that allows a controlled fore and aft movement of the seat when experiencing undulations in uneven terrain. (M and R Series only)
- Dramatically reduces horizontal vibrations and reduces jarring
- Feel of ride is as if the operator is floating over the ground
- Makes a big improvement to operator ride comfort
- Allows front to rear movement, 1-in. (2.5-cm) forward and 1-in. (2.5-cm) rearward, to be absorbed
- One lever with three positions
- Slide seat fore/aft up to 3 in. (7.6 cm)
- Engage isolator function to allow movement up to 1 in. (2.5 cm) fore and aft
- Disengage isolator function to lock seat in position
Foot pegs (standard on R Series, optional on E and M Series)
Foot pegs (standard on the Z530R and Z545R and available as an extra-cost kit on the Z515E and Z530M) provide you with different foot placement options.
Foot pegs are secured to the toe board in the horizontal position to provide more variability for foot placement. The pegs also act as handles to remove and replace the foot platform.
NOTE: Toe-board mat shown in photo is standard equipment on the Z530R and Z545R and can be ordered through Parts for the Z515E and Z530M.
Cup holder and storage compartment
The dual beverage holder on the left fender and storage compartment on the right fender add convenience for the operator:
- Room for two drink containers of various sizes for longer mowing jobs
- Storage compartment provides a safe and convenient location to store tools and supplies
NOTE: A storage compartment cover is standard on the Z530R and Z545R.
12-V charge port
12-V outlet is located within the storage compartment for the convenience of connecting a variety of electrical and electronic equipment.
Control console includes an easy-to-read fuel gauge
The control console is located to the right of the operator station and includes the following:
- Ignition switch
- Power take-off (PTO) control (yellow)
- Light switch
- Space for an additional electric control switch
- Engine speed controls (orange)
The Z545R engine is equipped with electronic fuel injection (EFI) and electronic throttle control (ETC) that permit simplified electronic control of engine speed and power for optimum performance in varying conditions:
- MAX – full power and performance for the toughest mowing conditions, such as longer, thicker grass
- ECO – fuel saving setting for easier mowing conditions, such as shorter or dryer grass
- MIN – engine idle speed for transport, loading/unloading, etc.
Advanced instrument display has the look and feel of a modern automobile with a power-up sequence cycles lights and gauges to indicate they are working:
- Display features a dark cockpit design to minimize operator distractions.
- Display is backlit for night visibility.
- Hour meter makes it easy to tell when oil changes and other maintenance should be performed.
- Electronic fuel gauge provides real-time fuel level information.
- A tachometer graphically displays engine speed.
- Target-zone graphics inform the operator of the engine speed range to use for best cut quality.
- An indicator tells the operator when the PTO is operating.
- Bright caution and stop lights capture the operator's attention when important information is on the instrument cluster.
- Damage can be prevented and repair costs can be reduced by addressing problems early.
- Operators are advised of what the problem is if they attempt to operate the mower with unsatisfied PTO, seat, or park brake interlocks.
- The indicators are also useful to identify the reasons the PTO or engine may have shut off when an interlock is unsatisfied.
- Operators are advised if battery voltage is low, normal, or excessive.
- The service indicator light illuminates to indicate a diagnostic error code is stored.
- On-board diagnostics provides trouble codes for use by trained technicians.
- For example, a technician can test switch functionality and circuit continuity without tools.
- On-board diagnostics provides trouble codes for use by trained technicians.
Fuel sight widow and fill cap
A conveniently located fuel-sight window allows the operator to view the fuel level when approaching the vehicle from the front:
- Semi-clear material makes seeing how much fuel is in the tank quick and easy.
- Large, 3-in. (7.6-cm) diameter fuel-fill opening reduces the chance of spilling when adding fuel.
- Fuel-fill opening is low and angled to make adding fuel easy.
- Cap is tethered to the fuel tank.
- Less chance of fuel cap getting lost
Mower deck lift and cut height
Mower deck cutting height can be adjusted from 1 in. (2.5 cm) to 4 in. (10.2 cm) in 0.25-in. (0.64-cm) increments for excellent cut quality and performance:
- A convenient foot-lift pedal is used to raise the mower deck for setting cut height or locking mower in the raised or transport position.
- A lift-assist spring is provided to optimize the effort it takes to raise the mower deck.
Cut-height adjustment and transport lock
- To adjust cut height, simply push down on the foot-lift pedal, place the cut-height pin in the desired location, and release the foot-lift pedal to lower the deck to the chosen height.
- Use the foot-lift pedal to lock the deck in transport mode. Simply depress the pedal all the way and the deck will lock into transport mode.
- To unlock and lower the deck, push down on the foot-lift pedal, pull up on the transport unlock lever, and release the foot-lift pedal to lower the deck to the chosen height.
Premium steering levers
Motion control levers are shaped and located for operator comfort and ease of control.
Premium control levers on the Z530R and Z545R are painted green and have a unique shape and size for more comfortable operation.
The motion-control levers can be adjusted to two different height settings and nine different fore-aft settings:
- Combined height and fore/aft adjustments provide 18 positions
- Increased operator comfort with more leg room and more hand positions
- Adjustable for most precise control of the machine
Tracking adjustment
Tracking adjustment can be made from the operator seat with the provided tool.
Park brake
The park brake is conveniently located:
- Large lever is easy to use.
- Park brake effectively holds the machine in the parked position.
- Park brake must be engaged (in the upper position) to start the engine.
- Once the engine is started, the park brake must be disengaged before operating the motion-control levers.
Brake-and-go logic:
- Park brake must be engaged for the engine to crank.
- Motion-control levers must be in the outward position for the engine to crank.
- Park brake must be disengaged before operating the motion-control levers or the engine will stall.
Safety interlock system
Safety interlocks help prevent operating in an unsafe way:
- The parking brake must be engaged for the engine to crank.
- Parking brake is set when motion-control levers are in the outward position.
- The operator presence system requires the operator to be in the seat to operate the PTO.
- The key switch interlock prevents bypass starting.
- If the operator leaves the seat when the PTO is engaged, the controls are in the operating position, or the parking brake is not set, the engine will shut down.
- The seat interlock switch disengages the mower when the operator leaves the seat.
- The engine will stall if the operator leaves the seat without the motion-control levers in the outward position and the parking brake set.
High Capacity Mower Decks are a heavy-duty, 9-gauge, 0.15-in. (3.8-mm), forged-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Experience optimal performance and dispersion of clippings, even at faster mowing speeds:
- Deep-deck design throughout the entire deck shell provides optimum mowing, mulching, and bagging performance.
- Optional MulchControl™ attachment provides superior mulching performance and versatility (not available on 48HC decks).
- Forged-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance.
- Mower deck is suspended from the vehicle for a smooth and level cut.
- Adjustable mower wheels positioned just above ground level help smooth out the mowing job.
Z530R and Z545R ZTrak™ Mowers are equipped with a 48-in. (122-cm), 54-in. (137-cm), or 60-in. (152-cm) High Capacity Mower Deck.
Compatibility
High Capacity Mower Deck size | Model | Mulching (optional) | Material collection (optional) |
48 in. (122 cm) | Z545R | Dedicated mulching system | 6.5-bu (230-L) two-bag Power Flow™ system |
54 in. (137 cm) | Z530R, Z545R | MulchControl system | 6.5-bu (230-L) two-bag Power Flow system |
60 in. (152 cm) | Z530R, Z545R | MulchControl system | Not available |
Deep deck design
The mower deck has a deep-deck design:
- Constructed from heavy, 9-gauge, 0.15-in. (3.8-mm) steel
- Minimizes the number of welds required
- Has a smooth underside for reduced material buildup
- Deep-deck design delivers excellent airflow so large volumes of material can be processed quickly and efficiently.
- A wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions.
- A durable, plastic deflector spreads grass clippings evenly across the lawn, is hinged, and can be raised to minimize the storage space required.
- 1-in. (25.4-mm) cold-forged spindles are heat-treated for strength and are supported by ball bearings.
- Standard front rollers and two double-captured wheels provide a more even mowing job and reduce the chance of scalping.
- Adjustable for different mowing heights
- The front edge is raised above the blade plane to allow for even cutting of tall grass.
- Blade overlap is greater than many conventional decks for a clean cut.
- The mower can side-discharge, mulch, or collect material.
Mower level adjustment
- Deck leveling and rake angle adjustment is provided at all four mower mounting points.
Reinforced leading edge
Steel reinforcing bars are welded to the front edge and trim side of the mower deck:
- Strengthens the deck to reduce chance of damage from obstructions
- Increased material thickness for longer deck life
Superior durability is designed in
The deck has deep, strong spindle pockets to keep the blades aligned, even after years of tough operation:
- Ribs formed in the deck shell add strength where needed.
- The aluminum spindle housing has an 8-in. (20-cm) base for extra strength.
Flip-up spindle covers make cleaning the spindle area convenient.
Wheels and rollers
Dual-captured side anti-scalp wheels and front rollers:
- Give a more even mowing job and reduce the chance of scalping
- Wheels are adjustable for different mowing heights
Optional MulchControl™ attachment
The MulchControl attachment makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:
- A beautiful looking lawn
- Grass clippings not blown onto the operator, driveways, or flower beds
- Less fertilizer required
- Elimination of the effort needed to dispose of clippings
MulchControl is an innovative, simple design that is easy to use and maintain:
- The MulchControl attachment includes baffles to control the flow of material under the deck.
- Mulching blades to give a more complete mulching job are included.
- The left mower blade area is completely enclosed and optimized for mulching and will mulch even when the mower is in the side-discharge mode.
- Baffles around the center and right blades are optimized for mulching when the discharge baffle is closed.
- A MulchControl kit is not available for 48HC mower decks.
MulchControl operation
The optional MulchControl attachment comes with a handle on top of the mower deck that is used to open and close the discharge baffle:
- The operator is required to get off of the machine in order to engage or disengage mulch mode.
- Changing from mulching to side discharge or vice versa with the hand lever takes only a few seconds.
MulchControl is well-suited to the following mowing situations:
- Usually mulch, but side discharge when grass gets too long
- Usually side discharge, but would like to be able to close the chute to control clippings
- Always mulch a main lawn, but often side discharge secondary lawns
- Bag clippings, but want to go farther before emptying bags
MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side-discharge or bagging when needed.
MulchControl limitations
While in the side-discharge mode, MulchControl will still mulch about one-third of the material. Therefore, the side-discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps reduce the amount of material being discharged. Other times this could work as a disadvantage:
- When cutting strong southern grasses, such as Zoysia and Bermuda
- When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
- When optimum bagging and lawn cleanup is desired
Optional 6.5-bu (229-L) ZTrak Z500 Series material collection system (MCS) (not available for 60-in. [152-cm] High Capacity Mower Deck)
The 6.5-bu (230-L) rear bagger efficiently collects material from a 48- or 54-in. (122- or 137-cm) Mower Deck:
- Hopper and included attachment bar/bumper, Power Flow blower, and chute components are ordered separately to make a complete MCS.
- A weight bracket is included for installation on the front of the vehicle to help counterbalance the weight of the hopper. For proper ballast with complete MCS:
- Four weights are required on a ZTrak Z500 Series equipped with a 48-in. (122-cm) Mower Deck.
- Three weights are required on a ZTrak Z500 Series equipped with a 54-in. (137-cm) Mower Deck.
The hopper design provides efficient bagging performance, clean operation, and easy-to-empty bags:
- Two durable bags give a generous, 6.5-bu (230-L) capacity.
- The bags lift out for easy emptying.
- An efficient chute provides a smooth flow of material to reduce the chance of plugging.
- The chute and Power Flow blower must be ordered separately.
- Standard mower blades are used for bagging.
- The air exhaust duct directs air from the hopper back and toward the ground for clean operation.
- Convenient latch makes opening and closing the hopper easy.
NOTE: Appropriate hopper with included attachment bar, Power Flow blower, chute and weights are required and ordered separately.
Specifications
Capacity | 6.5 bu (230 L) |
Material: | |
Hopper top | High impact polypropylene |
Chute | Polyethylene |
Blower housing | Nylon |
Fan | Ultra-high molecular weight (UHMW) polyethylene |
Bags | Polyester |
Filling | Directly into bags for emptying on ground or in trailer or into plastic liners |
Fan diameter | 13 in. (33 cm) |
Fan width | 2.75 in. (7 cm) |
Number of fan blades | Four |
NOTE: MulchControl attachments and MCS components are not included in base equipment for a Z500 Series machine and must be ordered separately.
- The Z545R engine includes EFI and ETC features for superior performance:
- EFI meters the correct amount of fuel directly into each engine cylinder for all operating conditions.
- Simplifies engine starts and warm-up by eliminating the need for the operator to use a choke.
- Fast, reliable starts are routine just like with a modern automobile.
- Fuel usage is reduced up to 20 percent compared to a carbureted engine.
- No adjustments are needed at altitude
- No choke-related problems since the choke is eliminated
- Reduced maintenance expense because of fewer complaints related to hard starting, vapor lock, misfire, run-on, or fouled spark plugs
- Simplifies engine starts and warm-up by eliminating the need for the operator to use a choke.
- ETC works in conjunction with EFI to electronically adjust the supply of fuel air mixture.
- Increases torque as needed to maintain engine operating speed under load.
- Ground speed and mower blade-tip speed remain constant, even in heavy-grass conditions, to improve productivity and cut quality.
- Mechanical governors cannot respond fast enough to maintain a constant engine speed.
- Some torque rise remains to warn the operator before the engine stalls.
- EFI meters the correct amount of fuel directly into each engine cylinder for all operating conditions.
- Large 44.2-cu in. (724-cc) displacement for torque to pull through tough operating conditions.
- Easy inspection and removal of any debris that may have collected using two large cleanout ports that are integrated into the engine shroud over the cylinder heads.
- Engine service times, reliability, and life are increased with the use of premium engine oil and air filtering systems, as well as the cooling design.
- 25 hp (18.6 kW) at 3500 rpm for excellent performance
- Greater torque, lower vibration, and improved sound quality from the V-twin cylinder design
- Fast starts with electronic ignition
- Long engine life with cast-iron cylinder liners
- Excellent power and fuel economy with overhead valves
- Reliable operation with in-line fuel filter
No choke control is needed:
- A servo motor controls the intake air butterfly valve and the air stream.
- For cold starts, the actuator will close the valve, making starting the engine easier. No choke lever is needed.
- Starts are quick and easy, even for inexperienced operators.
Since the Z545R engine is equipped with EFI and ETC, simplified electronic control of engine speed and power for optimum performance in varying conditions is advantageous:
- MAX – full power and performance for the toughest mowing conditions, such as longer, thicker grass
- ECO – fuel saving setting for easier mowing conditions, such as shorter or dryer grass
- MIN – engine idle speed for transport
Easily access the oil check and fill cap that is located at the top of engine. A no-tools oil-drain cap with hose is also provided for easy, no-mess maintenance.
4.5-gal. (17-L) fuel capacity for extended mowing times
The 4.5-gal. (17-L) fuel tank is easy to fill and has a sight level window and dash-mounted gauge:
- Longer times between refills with the large tank
- Easy to see how much fuel is in the tank by viewing the sight gauge when approaching from the front of the machine or glancing at the dash from the seat
- Easy filling and minimum chance of spills with a large, 3-in. (7.6-cm) diameter fuel opening that is low and angled
John Deere recommends the use of fuel stabilizer in gasoline. See Fuel-Protect for gasoline engines (8 oz [237 mL]) for more information.
The spacious operator station has been designed for comfort, visibility, and ease of use:
- Getting on and off easy with the flat operator platform.
- Convenient-to-use controls are located close to the operator.
- Operator controls are color coded and designed for easy identification and operation.
The ROPS and seat belt work in conjunction to provide a protective zone around the operator:
- It reduces the operator’s risk of being crushed under the vehicle should it overturn.
- In most situations, the ROPS limits the overturn to little more than 90 degrees.
- When used with a seatbelt, the ROPS is very effective in preventing deaths and serious injuries.
- Use of the seat belt is recommended when operating with ROPS in the upright position.
Foldable ROPS and retractable seat belt are standard equipment:
- Handles on the position pins provide a good grip and make changing the angle of the ROPS easier.
- The door height of most garages will accommodate the machine with ROPS in the fully raised position.
- Easy-fold ROPS improves the ability to store the ZTrak™ mower in structures with a lower door opening.
Model | Height at top of ROPS in fully raised position |
Z515E, Z530R | 70.1 in. (178 cm) |
Z530R, Z545R | 70.7 in. (179.6 cm) |
Extra, top-of-the-line appearance features make the Z530R and Z545R look as good as they are
Green seat accents and the John Deere logo visually communicate a premium offering and give a distinctive appearance.
Green painted motion-control levers (versus black on the Z515E) blend with seat design.
- Premium motion-control levers have additional material and bends to enhance steering comfort and control.
Green fender trim adds style and keeps the machine cleaner by blocking some of the material thrown by the tire.
Rear wheel rims have an automotive look for overall enhanced machine appearance.
Left and right tunnel supports enhance the appearance of the Z530R and Z545R and work in conjunction with the rubber-isolated floor platform to provide extra support and rattle-free operation.
Front and side lights
The attractive design includes a provision for light-emitting diode (LED) lighting:
- Two front lights face forward for front visibility.
- Side lights are positioned to provide excellent visibility of the mower deck.
NOTE: Lights are standard on the Z530R and Z545R and optional on the Z515E and Z530M.
Formed and welded steel frame
A strong, welded steel frame provides solid, reliable support for the machine components and operator:
- Heavy-duty 1.5- x 2-in. (38- x 51-mm) frame tubing for durability
- Rear frame provides solid support and protection for the engine
Rear hitch
Strong frame is designed to accommodate a rear hitch that can be used to pull a variety of lawn equipment:
- Can support up to 100 lb (45.4 kg) of tongue weight
- Can pull equipment weighing up to 250 lb (113.4 kg)
NOTE: The rear hitch is standard on the Z530R and Z545R and optional on the Z515E and Z530M.
Large, smooth-riding front caster wheels
Large front caster wheels provide a smooth ride and level cut:
- Large, 13x5.0-6 tires travel over bumps more smoothly
- Pneumatic tires for the smoothest ride
- Better performance on slopes
Caster wheels turn easily on two maintenance-free sealed ball bearings for both the spindles and the wheel axles:
- Long, trouble-free life
- Designed to give smooth turns without damage to the turf
- Large rear drive wheels for a smooth ride and level cut
Large rear tires
Rear tires have high-quality tread and optimum size for superior traction and smooth ride:
- Tire size is 23x10.5-12.
- Tread pattern is optimized for excellent traction and minimum turf damage.
- Special wheel design gives an enhanced appearance to the machine.
Dual unitized transmissions efficiently power the ZTrak™ mower forward and reverse and provide steering capability:
- Experience excellent hillside stability with transmissions that are set low in the vehicle.
- Tuff Torq® TZT7-M transmissions are reliable and durable.
- Beefed-up 1-in. (2.5-cm) axles for greater strength
- Maintenance-free, unitized transmissions are sealed and have no hose connections to leak hydraulic fluid.
- Four-bolt hubs provide a reliable and convenient wheel-mounting system.
Tow-valve controls are provided for each transmission and are located on the transmission near the expansion tanks:
- Easy to reach and use
- Allow the vehicle to be moved without the engine running
Premium steering levers
Motion control levers are shaped and located for operator comfort and ease of control.
Premium control levers on the Z530R and Z545R are painted green and have a unique shape and size for more comfortable operation.
The motion-control levers can be adjusted to two different height settings and nine different fore-aft settings:
- Combined height and fore/aft adjustments provide 18 positions
- Increased operator comfort with more leg room and more hand positions
- Adjustable for most precise control of the machine
Tuff Torq is a trademark of Kanzaki Kokyukoki Mfg. Co., Ltd.
A convenient service interval decal provides basic maintenance information:
- Provides a quick reference for keeping recommended service up to date
- Located under the seat for easy viewing
Quick response (QR) codes link to owner information web pages
John Deere riding lawn mowers are supported by owner information web pages that include links to:
- Safety and how-to videos
- Operator’s manuals
- Parts catalog
- Maintenance reminder sheets
- Attachments
- Warranty statements
To speed access to owner information web pages, a QR code is printed onto a PIN label located under the seat on the battery cover. Since each vehicle model has its own web page, the links are specific to the owner’s model. The QR code also includes the vehicle’s unique PIN which allows for additional customization of the owner information web page in the future.
Engine service
The engine is easy to service and takes a minimal amount of time:
- Air filter is on top of the engine and the cover flips up for easy access.
- Cooling fin cleanout ports are located under the air cleaner cover.
- Engine oil fill/check tube is easy to see and reach.
- Oil drain tube is provided for easier, cleaner oil changes.
Mower service
The footrest area is removable without tools to easily access the mower deck for service:
- Easy to clean grass off the top of the mower
- Provides convenient access to the mower drive
Accel Deep™ Mower Decks have features that make them easy to service:
- Flat-top design minimizes places for debris to collect.
- Spring-loaded, flip-up belt guards make removing debris easy.
- Deck-leveling gauge and wrench are conveniently stored on the machine
Tracking adjustment
Tracking adjustment can be made from the operator seat with the provided tool.
Warranty
Limited bumper-to-bumper warranty for new turf and utility equipment (U.S. and Canada only):
- Z545R - 48 months or 500 hours, whichever comes first
Overview
Keep a mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the mower’s barcode to get custom information about the mower.
Benefits
- Engine hours, fuel level, and battery health (as compatible)
- Mowing history with time, distance, area, and speed
- Current day and five-day weather forecast based on location
- Walk-through setup guides
- Expert mowing tips
- Useful attachments for future purchase
- Periodic maintenance reminders
- Safety instructions
To download the free MowerPlus app, visit the Apple® App Store® or Google Play™ store.
Additional details
MowerPlus connectors (sold separately)
Three MowerPlus connectors are available to transmit vehicle information to the MowerPlus app.
BUC10510 MowerPlus Hour Meter Connector is for use with:
- Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
- Model year 2015 to 2020 S240 Tractors (serial number -880,000)
- S100, S110, S140, and S220 Tractors
BUC10929 MowerPlus Deluxe Smart Connector is for use with:
- All S120, S130, S160, S170, and S180 Tractors
- Model year 2021 and newer S240 Tractors (serial number 880,001-)
- Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)
BUC10537 MowerPlus Smart Connector is for use with:
- Model year 2016 and newer Select Series X300 and X500 Tractors
All the MowerPlus connectors transmit engine hour information to the app, making it easy to track maintenance intervals. The MowerPlus Smart Connector and MowerPlus Deluxe Smart Connector also transmit the fuel level.
MowerPlus connectors require the MowerPlus app on a mobile device to use. The John Deere MowerPlus app and operating system requirements can be found in the mobile device’s app store. The MowerPlus app is only available in the English language, and it is not available in all countries. BUC10510 MowerPlus Hour Meter Connector requires iOS® version 10 or higher and is not compatible with Android™ operating systems.
Apple and App Store are trademarks of Apple, Inc. Google Play and Android are trademarks of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.
Specs & Compare
Key Specs | Z545R Current Model |
Engine power | 25 hp 18.6 kW |
Engine model number | HTR EFI/ETC |
Forward speed | 0-9 mph 0-14.5 km/h |
Front caster tires | 13x6.5-6 |
Drive tires | 23x10.5-12 |
Seat back height | High back with armrests and ComfortGlide™, 22.5 in. 57.1 cm |
Width of cut | High capacity mower deck, 48 in. 122 cm High capacity mower deck, 54 in. 137 cm High capacity mower deck, 60 in. 152 cm |
Mulching system | Optional MulchControl™ attachment, 48 in. 122 cm Optional MulchControl attachment, 54 in. 137 cm Optional MulchControl kit, 60 in. 152 cm |
Warranty | 4 year/500 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Battery | |
Charger | |
Engine | |
Power | 25 hp 18.6 kW |
Model number | HTR EFI/ETC |
Displacement | 44.2 cu in. 724 cc |
Cylinders | V-twin |
Lubrication | Full pressure with replaceable filter, capacity, 2 U.S. qt 1.9 L |
Type | Overhead valve |
Battery | 12 V 300 CCA |
Choke/speed control | Separate control levers |
Cooling method | Air |
Fuel tank capacity | 4.5 U.S. gal. 17 L |
Fuel gauge | Electric gauge and fuel level sight line |
Drive train | |
Dual hydros | Tuff Torq TZT7-M with 1-in. (2.5-cm) axles |
Hydraulic pumps | |
Wheel motors | |
Battery | |
Charger | |
Transmission | |
Travel speed | |
Forward speed | 0-9 mph 0-14.5 km/h |
Reverse speed | 0-4.5 mph 0-7.2 km/h |
Speed and direction control | Twin premium levers |
Control adjustment | 2-height/9-fore-aft, 18 positions |
Chassis | |
Frame | Heavy-duty frame tubing |
Primer/paint | E-coat/powder |
Front caster tires | 13x6.5-6 |
Front caster bearings | Sealed ball bearings |
Drive tires | 23x10.5-12 |
Hour meter | Yes |
Service interval decal | Yes |
Storage compartment | Yes and covered |
Cup holder | Yes |
Maximum towing capacity | 250 lb 113 kg |
Seat | |
Seat back height | High back with armrests and ComfortGlide, 22.5 in. 57.1 cm |
Fore-aft adjustment | While seated, 3 in. 7.6 cm |
Seat suspension | Two springs and ComfortGlide |
Lift system | |
Type | Foot lift |
Mower cut height | 1-4 in. 2.5-10.2 cm |
Cut height increments | 0.25 in. 0.64 cm |
Preset cut height | Yes |
Mower deck | |
Width of cut | High capacity mower deck, 48 in. 122 cm High capacity mower deck, 54 in. 137 cm High capacity mower deck, 60 in. 152 cm |
Type | High-capacity side discharge |
Mower deck material | 9 gauge 0.150 in. 3.8 mm |
Mower drive system | V-belt |
PTO | |
Type | Electric, 125 lb-ft 169.5 Nm |
Drive | V-belt |
Dimensions | |
Wheelbase | 49.2 in. 1250 mm |
Overall length | 81.9 in. 2080 mm |
Width without mower | 48.7 in. 1237 mm |
Width with mower | 48 HC: 62.4 in. 1585 mm 54 HC: 68.3 in. 1735 mm 60 HC: 73.5 in. 1867 mm |
Width with mower (deflector raised for storage) | 48 HC: 53.6 in. 1361 mm 54 HC: 59.6 in. 1514 mm 60 HC: 65.6 in. 1667 mm |
Height | ROPS in folded position: 49.2 in. 1250 mm ROPS in raised position: 71.7 in. 1821 mm |
Weight | With mower and fuel, 48HC, 826 lb 375 kg With mower and fuel, 54HC, 832 lb 378 kg With mower and fuel, 60HC, 840 lb 382 kg |
Operation | |
Rollover protective structure (ROPS) | Yes |
Slope operating limit | 15 degrees, 10 degrees with an MCS |
Operator presence system | Yes |
Park brake interlock | Yes |
Operator video | Yes |
Buyer's notes | |
Note 1 | Mower wash port makes cleaning the deck easier |
Note 2 | Flip-up foot platform for easy service access |
Note 3 | 18-position adjustable motion-control levers |
Warranty | 4 year/500 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Optional attachments | |
Mulching system | Optional MulchControl attachment, 54 in. 137 cm Optional MulchControl kit, 60 in. 152 cm |
Rubber floor mat | Foot platform and toe board |
Sun shade | Optional |
Mounted sprayer | No |
Storage cover | Yes |
Light kit | 4-point LED Light kit |
Material collection system | Power Flow rear bagger, 6.5 bu 230 L Not available on 60HC |
Additional information | |
Manufacturing location | Greeneville, Tennessee, USA |
Date collected | 1-Dec-21 |
Offers & Discounts
Reviews
Location: Iowa
Length of Ownership: 6months
Usage: Weekly
Used this summer , strong high flow and easy to run. Actually quite impressed with it !
Location: Soddy Daisy Tn
Length of Ownership: 1yearOrLonger
Usage: Weekly
I bought this machine about 14 months ago. Ordered on line took a couple months to get but it came in earlier than promised. Have used to cut 2+ acres, does a great job! Researched for about 3 month before deciding on the Z545R I love the EFI it starts first time every time!
Location: central Pennsylvania
Length of Ownership: 1week
Usage: Weekly
Spent 3 months researching reviewing zero turn mowers. Bought the z545r based on its class exclusive features and good looks. Mowed with it last night and was blown away by its performance. It actually rides smoother than the x350 it replaced and it powers through tall heavy grass like nothing. Also some people say you can’t mow hills with a zero turn…..apparently they don’t have a John Deere. Go slow and steady on the steep stuff and you’ll be fine
Location: Iowa
Length of Ownership: 1month
Usage: Daily
Super comfortable and does an amazing job cutting / spreading clipping with discharge down. My old mower went down and grass was very tall. (Probably 8-10 inches and taller in other places) Mowed one time at 3 inches and you’d never know it had gotten that tall. It processes the grass amazing. Couldn’t be happier with the power and the low fuel consumption of the EFI. In my mind this is a great value for what your getting.
Location: Ridgeway Iowa
Length of Ownership: 1week
Usage: Weekly
Z545 zero turn got delivered from Bodensteiner Implement Co - Decorah last Friday. I'm replacing a 2008 Z445 with this mower. It took around 3 months to come in the dealer did warn it would be few months. Mowed one time with it and real happy so far. Only bummer is dealer said it would have Kawasaki engine but came with Briggs. Since 2008 I have been real happy with John Deere zero turn mowers.
Location: Punta Gorda
Length of Ownership: 1month
Usage: Weekly
I bought this lawnmower two weeks ago from Everglades Equipment Group in Fort Myers. I had been reading reviews on zero turn mowers for about two months. I found this mower to have the most features for the money plus everyone was raving about how well it cuts. I have one acre of land and it has cut my mowing time from 1.5 hours to 50 minutes. I have used it twice and still have half a tank of gas. It sips gas.
Location: New jersey
Length of Ownership: 1month
Usage: Weekly
I had a Z445 that I purchased in 2010. It was my first zero turn and the machine gave me 11 trouble free seasons of mowing. So for my 60th birthday this April, I decided to treat myself to a new Z545R. needless to say, it is the best birthday present I bought myself!!! I am very pleased with the unit! It feels wonderful, the cut is John Deere terrific as usual!! The features of the mower are great! Love the operators display, gas gauge, and the EFI is terrific! I am very pleased with sticking with another JD, How about a pushbutton start for the next model? Thank You JD for making such a great mower and looking forward to another 11 + years of mowing, Geez, that would make me 71! ouch!!
Location: Oregon
Length of Ownership: 3months
Usage: Weekly
If the dealer would have adjusted the steering when doing setup I would rate higher. It would creep in neutral to the right forward and when reversing if sticks pulled equally always goes left as in right wheels appear to go twice as fast. they adjusted the neutral but said it is normal for them to go faster on one drive if adjusted to go straight with sticks equal. I had another brand and it goes straight forward and backward.
Location: Meeker,Ok
Length of Ownership: 6months
Usage: Weekly
I have had several John Deere mowers and have been impressed by all of them but to me this one is the best I’ve owned. Leaves our yard with an awesome cut every time!!
Location: Gagetown Mi
Length of Ownership: 1month
Usage: Weekly
Bought it this past winter. Have the power bagger added. Haven’t used the mower yet but 5 stars for the guys at tri county. Amazing service and super friendly.